Products
The Air T30 hand torch is rugged and designed to withstand the toughest environments. The Air T30 torch comes pre-installed on the Powermax30® AIR plasma system with a 4,5 m (15') lead and work clamp with 4,5 m (15') lead.
Cut skeletons faster and easier with the new Hypertherm torch sled for the Duramax® Hyamp™ Long torch. This new guide allows the torch to glide smoothly over the face of the skeleton and is also useful for scrapping.
Hypertherm teach tools for SmartSYNC®, Duramax® and Duramax Hyamp™ robotic torches assist with programming robots before cutting. The torch teach tools enable system operators to program the robot’s cutting path, while visually verifying the torch will not touch the workpiece while cutting.
Patented HyAccess™ consumables extend approximately 76 mm (3") beyond standard Powermax consumables to provide the extra reach needed when cutting or gouging in hard to reach or confined spaces.
The Powermax800® 50 amp plasma power supply was last manufactured in 1998, and is no longer available for sale from Hypertherm. Effective January 2021 original consumables for this system will no longer be available.
Legacy Power Supply
The MAX42® 40-amp plasma power supply was last manufactured in 1996, and is no longer available for sale from Hypertherm. Original torches and consumables for this system are no longer be available. Please refer to the Duramax® retrofit torch and consumable upgrade option.
Legacy Power Supply
The Powermax1250® 80-amp plasma power supply was last manufactured in 2010, and is no longer available for sale from Hypertherm. We continue to make original consumables and repair parts. Original torches for this system are no longer available.
Legacy Power Supply
The Powermax1650® 100-amp plasma power supply was last manufactured in 2012, and is no longer available for sale from Hypertherm. We continue to make original consumables and repair parts. Original torches for this system are no longer available.
Legacy Power Supply
The HySpeed® Plasma HSD130™ is positioned between Powermax® air plasma and HyPerformance® HyDefinition® plasma systems. The HSD130 features impressive cut speeds, rapid piercing and minimal secondary operations for maximum productivity.
Legacy Power Supply
ProNest® LTS software has been discontinued in favor of Hypertherm’s other industry leading nesting software products (ProNest®, and ProNest® LT). Hypertherm will continue to provide technical support.
Legacy Product
The ArcGlide torch height control was last manufactured in December 2023 and is no longer available for sale from Hypertherm. Hypertherm's Technical Service department will continue to support this model.
Legacy Product
The Powermax190c® 12-amp plasma power supply was last manufactured in 2009, and is no longer available for sale from Hypertherm. We have stopped making replacement torches, consumables and repair parts for this model.
Legacy Power Supply
Sensor PHC was last manufactured in December 2023, and is no longer available for sale from Hypertherm.
Legacy Product
TurboNest® software has been rebranded to Hypertherm’s ProNest® LT software. It’s the same great software, just under a new name.
Legacy Product