Powermax30 XP plasma cutter
How-to videos (8)
Operator and instruction manuals (3)
Powermax30 AIR and Powermax30 XP Ecodesign Requirements (Revision 0) (Multilingual)
Last updated
12/09/2020
Part number: 811250MU
Safety and Compliance Manual (Revision 8) (Multilingual)
Last updated
08/29/2022
Part number: 80669C
Showing 3 of 3 documents
Service manuals (1)
Showing 1 of 1 documents
Specifications
For full specifications, reference the manual.
Input voltages | 120-240 V, 1-PH, 50/60 Hz |
---|---|
Input current @ 3.8 kW | 120-240 V, 1-PH, 25-18.8 A |
Output current | 15-30 A |
Rated output voltage | 125 VDC |
Duty cycle @ 40°C (104°F) | 35%, 240 V 20%, 120 V |
Open circuit voltage (OCV) | 256 VDC |
Dimensions with handles | 356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H |
Weight w/ 4,5 m (15') torch | CSA: 9.7 kg (21.4 lbs) CE, CCC: 9.5 kg (21 lbs) |
Gas Supply | Clean, dry, oil-free air or nitrogen |
Recommended gas inlet flow rate / pressure |
113.3 l/min (4 scfm) at 5.5 bar (80 psi) |
Input power cable length | 3 m (10') |
Power supply type | Inverter - IGBT |
Engine drive requirement | 5.5 kW for full 30 A output |
Certifications | CSA-certified for use in the Americas and Asia, except China CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted. CCC for use in China. |
Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty. |
Environmental stewardship is a core value of Hypertherm. Our Powermax products are engineered to meet and exceed global environmental regulations including the RoHS directive.
Consumables
Please contact an authorized Hypertherm distributor to place your consumables order.
Drag cutting
Extended reach cutting
Torch | Operating range | Retaining cap | Nozzle/shield | Electrode | Swirl ring |
---|---|---|---|---|---|
Duramax LT torch - Hand - 75° | 15 A - 30 A | 420148 | 420144 | 420137 | 420211 |
Extended reach gouging
Torch | Operating range | Retaining cap | Nozzle/shield | Electrode | Swirl ring |
---|---|---|---|---|---|
Duramax LT torch - Hand - 75° | 15 A - 30 A | 420148 | 420147 | 420137 | 420211 |
Accessories

Adjustable eye shades
The Hypertherm adjustable eye shades are designed for use with < 40 amp plasma cutting systems.

Arc-rated metalworking jersey
The Hypertherm arc-rated metalworking jersey is top quality washable welder wear made from modacrylic fabric for flame and arc flash resistance.
Field service bulletins (16)
Optional Oil Removal Air Filter Kit and Element Replacement (Revision 0)
Last updated
06/30/2017
Part number: 809610
Showing 6 of 16 documents