Powermax85 SYNC plasma cutter
For files in additional languages, please go to the Documents Library.
How-to videos (7)
Operator and instruction manuals (15)
.Cut Charts for Powermax45/65/85/105 SYNC (Multilingual) (Revision 4)
.Mechanized Cutting with Powermax45/65/85/105 SYNC (Revision 5)
.Operator Manual for Powermax65/85/105 SYNC (Revision 4)
Showing 6 of 15 documents
Service manuals (3)
Service Replacement Parts for SmartSYNC Torches (Revision 1)
Showing 3 of 3 documents
Specifications
For full specifications, reference the manual.
Cut capacity
| Capacity | Thickness | Cut speed |
|---|---|---|
| Recommended | 25 mm (1″) | 500 mm/min (20 ipm) |
| 32 mm (1-1/4″) | 250 mm/min (10 ipm) | |
| Severance (hand cutting) | 38 mm (1-1/2″) | 125 mm/min (5 ipm) |
| Pierce* | 20 mm (3/4″) |
*Pierce rating for handheld cutting, or mechanized cutting with programmable torch height control.
Maximum removal gouging
| Capacity | Metal removal rate | Gouge profile |
|---|---|---|
| Typical gouge | 8,2 kg (18.2 lbs.) per hour | 3,5 mm D x 6,6 mm W (0.14″ D x 0.26″ W) |
General specifications
|
Input voltages |
CSA
CE
|
|---|---|
|
Kilowatt output |
12.2 kW |
|
Input current |
CSA
CE
|
|
Output current |
25–85 A |
|
Rated output voltage |
143 VDC |
|
Duty cycle @ 104° F |
CSA
CE
|
|
Open circuit voltage (OCV) |
CSA: 305 VDC CE: 270 VDC |
|
Dimensions with handles |
483 mm D; 233 mm W; 430 mm H (19″ D; 9.2″ W; 17″ H) |
|
Weight w/7.6 m (25′) torch |
CSA: 32 kg (67 lbs.) CE: 23.5 kg (52 lbs.) |
|
Gas supply |
Clean, dry, oil-free air or nitrogen |
|
Optimum inlet gas pressure |
7.6–8.3 bar (110–120 psi) |
|
Minimum inlet gas pressure |
5.2 bar (75 psi) |
|
Recommended inlet gas flow rate |
Cutting: 210 I/min @ 5.9 bar (450 scfh, 7.5 scfm @ 85 psi) Gouging: 210 I/min @ 4.8 bar (450 scfh, 7.5 scfm @ 70 psi) |
|
Input power cable length |
3 m (10′) |
|
Power supply type |
Inverter–IGBT |
|
Engine drive requirement |
20 kW for full 85 A output |
|
Electrical efficiency |
91.9% |
|
Certifications |
|
|
Warranty |
Power supplies have a 3-year warranty and torches a 1-year warranty |
Consumables
Please contact an authorized Hypertherm distributor to place your consumables order.
CARTRIDGE-85-Drag-Fine-Hand
CARTRIDGE-85-Mech-standoff-Fine
CARTRIDGE-85-MaxControlRemoval-Mech
Accessories
Hypertherm cartridge reader
The Hypertherm cartridge reader provides a simple process for reviewing data stored in Hypertherm cartridges. Data analysis helps customers understand cartridge utilization and identify operator training opportunities.
Powermax EtherCAT Interface for EDGE Connect
The Powermax® EtherCAT® Interface is an all-in-one adapter that allows a digital connection between the Powermax equipment and the EDGE® Connect CNC. This allows faster equipment setup, an intuitive operator interface, and access to real-time diagnostics information.
Robotic torch clamp kit
The robotic torch clamp kit is designed to simplify integration of Powermax® robotic torches on robots. The clamp fits perfectly with the torch dimensions and securely holds the torch during cutting applications.
Field service bulletins (9)
Cartridge Reader and App | Lecteur de cartouche et application - Powermax65/85/105 SYNC
Heat Shield Kits for T Series, Duramax, Duramax Hyamp Handheld Torches Écran de chaleur des torches manuelles 804230 revision 6
Showing 6 of 9 documents
Technical support
| Resource center |
| Support by product |
| System support |
| Software updates and support |
| Report counterfeit consumables |
| Documents library |
| Training |
| FAQs |
| For educators |
| Tradeshows and events |
| Additional resources |
Useful links
-
Recycling information for Hypertherm customers and recyclers
Learn about Hypertherm's committment to the WEEE Directive in Europe - Elimination, recycling, and reduction of waste is the foundation of a good approach to end-of-life equipment management. Determine the most sustainable path for your system.