HyPerformance HPR130XD

The HyPerformance® HPR130XD plasma system has been designed and built for maximum performance and productivity in x-y, bevel and robotic cutting operations. The versatile 130-amp rated system combines fast cutting speeds, rapid process cycling, quick changeovers and high reliability, and gives you unmatched HyPerformance cut quality from very thin up to mid-range materials.


System information


Superior cut quality and consistency

  • HyPerformance plasma cuts fine-feature parts with superior quality and consistency
  • HyDefinition® technology aligns and focuses the plasma arc for more powerful precision cutting up to 38 mm (1-1/2").
  • New HDi™ technology delivers HyDefinition cut quality on thin stainless, with extremely sharp top edge quality, shiny surface finish, and superior angularity with reduced angle variation
  • Patented True Hole™ technology (auto gas systems only) produces hole quality that is significantly better than anything previously achievable with plasma

Minimized operating cost

  • LongLife® technology significantly increases consumable life and enables consistent HyDefinition cut quality
  • Faster cut speeds let you produce more parts per hour; higher quality cutting virtually eliminates the cost of secondary operations
  • Patented PowerPierce® technology lets you pierce thicker than ever before and replace slower-cutting oxyfuel technology

“Do anything” versatility

  • Cuts, bevels, and marks carbon steel, stainless steel, aluminum, and other metals with HyDefinition precision
  • Modular system design allows easy power supply upgrades to increase system capabilities when requirements change

Industry-leading reliability

  • Robust, simple system architecture with 50% fewer parts than most competitive systems
  • Best-in-class manufacturing and extensive testing ensure that every Hypertherm system meets the highest quality standards


Mild steel cut capacity Dross free
Production pierce
Maximum cutting capacity
16 mm (5/8")
32 mm (1-1/4")
38 mm (1-1/2")
Stainless steel cut capacity Production pierce
Maximum cutting capacity
20 mm (3/4")
25 mm(1")
Aluminum cut capacity Production pierce
Maximum cutting capacity
20 mm (3/4")
25 mm (1")
(Mild steel)
Book specification at highest output current 12 mm (1/2")
2200 mm/m (80 ipm)
Cut angle ISO 9013 range* 2-4
Weldability   Ready to weld
Process gases
by material
Mild steel

Stainless steel

02/Air, 02/02, Ar/Air

H35/N2, N2/N2, H35-N2/N2, F5/N2,
Ar/Air, Ar/N2

H35/N2, Air/Air, H35-N2/N2, Ar/Air, Ar/N2
Process amps Not all processes available
for all materials

* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.

Buying information

Visit our where to buy page to find a potential partner, or contact Hypertherm directly if you need further assistance.


Manuals and documents

Media gallery

  • Compilation of the HyPerformance® XD plasma systems

    Watch a compilation of the HyPerformance® XD (HPRXD) plasma systems.


  • HPRXD HDi 6mm (.25 in) stainless

    Watch an HPRXD® HDi cutting 6 mm (.25 in) stainless steel


  • HPRXD 3mm (10 GA) mild steel

    Watch an HPRXD® cutting 3 mm (10 GA) mild steel


  • HPRXD 12mm (.5 in) mild steel

    Watch an HPRXD® cutting 12 mm (.5 in) mild steel


  • HPRXD 12mm (.5 in) mild steel under water

    Watch an HPRXD® cutting 12 mm (.5 in) mild steel under water


  • HPRXD 20mm (.75 in) mild steel

    Watch an HPRXD® cutting 20 mm (.75 in) mild steel


  • HPRXD HDi 3mm (10 GA) stainless

    Watch an HPRXD® HDi cutting 3 mm (10 GA) stainless steel


  • HPRXD samples 3 stainless

    See 3 HPRXD stainless steel cut samples


  • HPR130XD cut sample
  • HPR130XD cut sample

Related products