Freedom 38 PPA engine-driven plasma system
Operator and instruction manuals (2)
Freedom 38 PPA Getting Started Guide (808930 revision 3) Guide de démarrage
Last updated
05/15/2017
Part number: 808930
PDF (449KB)
Showing 2 of 2 documents
Service manuals (1)
Freedom 38 PPA Service Manual (809010 revision 0)
Last updated
05/01/2017
Part number: 809010
PDF (19.86MB)
Showing 1 of 1 documents
Specifications
For full specifications, reference the manual.
Genset
| Fuel type | Diesel, ASTM 975, 1-D and 2-D | |
|---|---|---|
| Oil capacity | 14.8 quarts | |
| Fuel capacity | 17 gallons | |
| Engine speed | 1800 rpm constant speed | |
| Exhaust gas flow | 353 CFM | |
| Output | 480 V 3-PH (40,000 watts standby, 36,000 watts continuous) , 120 V, 1-PH, auxiliary | |
| Dimensions | 36" D x 70" W x 47" H* | |
| Weight w/full fuel tank | 2,196 lbs (996 kg) | |
| Fuel consumption | 100% continuous 3.3 GPH 50% load 1.7 GPH |
|
| Operating temperature (minimum) | –4° F (–20° C) | |
| Battery capacity | 750 CCA | |
| Battery charging output | 14 V/55 A | |
| Average sound level | 91.5 dB(A) @ 1 m 77.5 dB(A) @ 7 m |
|
| Warranty | Engine, genset, and alternator are warrantied by the respective manufacturers. | |
*Height from base to top of exhaust
Powermax125
| Input voltages | 480/600 V, 3-PH, 50/60 Hz | |
|---|---|---|
| Kilowatt output | 21.9 kW | |
| Input current @ 21.9 kW | 480/600 V, 31/24 A | |
| Output current | 30 - 125 A | |
| Rated output voltage | 175 VDC | |
| Duty cycle @ 104°F | 100% @ 125 A, 480/600 V, 3-PH | |
| Open circuit voltage (OCV) | 320 VDC | |
| Gas Supply | Clean, dry, oil-free air | |
| Power supply type | Inverter | |
| Operating temperature | 14 to 104° F (-10 to 40° C) | |
| Warranty | Powermax systems have a 3-year warranty and torches a 1-year warranty. | |
Typical gouging profile
| Deutz engine | Alternator | Air compressor | Powermax125® plasma system |
|---|---|---|---|
| 4-cylinder, turbo diesel, Tier 4 interim compliant, oil-cooled | 3-phase | 470 l/min (996 scfh) @ 10 bar (145 psi) | 25 mm (1") pierce |
| 38.0 kW @ 1800 rpm, 63.4 HP | Class H, brushless | 5 gallon holding tank | 38 mm (1-1/2") recommended cut, 57 mm (2-1/4") severance |
| Cold start pre-heat | Auxiliary air line | 100% duty cycle |