![]() Sensor® torch height control (THC) |
![]() ArcGlide® torch height control |
![]() Sensor® torch height control (PHC) |
||||
---|---|---|---|---|---|---|
Key specifications | ||||||
SureCut™ compatible | — | — | ||||
Cut processes |
Plasma Plasma |
Plasma Plasma |
Plasma (light industrial/conventional air/oxygen) |
|||
Table types |
Downdraft; Water table |
Downdraft; Water table |
Downdraft | |||
Lifter stroke | 239 mm (9.4″) | 239 mm (9.4″) | 152 mm (6″) | |||
Max speed | 15240 mm/min (600 ipm) | 15240 mm/min (600 ipm) | 5120 mm/m (200 ipm) | |||
Weight capacity | 11.4 kg (25 lbs) | 11.4 kg (25 lbs) | 4.5 kg (10 lbs) | |||
Communication protocol |
Discrete wiring to lifter I/O Communication is based on the motor end drive selection. For EDGE Connect, choose an EtherCAT manufacturer from our approved vendor list. Discrete, RS-422 serial, or EtherCat to the HPR® / XPR™ plasma system |
With Hypernet® – Hypernet® to the CNC/HMI or discrete to the plasma Without Hypernet® - Hypernet® to the HMI or RS-422 serial to the CNC with discrete to the plasma |
Discrete wiring to CNC and plasma | |||
Breakaway type | Magnetic or pneumatic | Magnetic or pneumatic | Magnetic | |||
Torch clamp sizes |
35 mm (1-3/8 in.): Powermax® 44 mm (1-3/4 in.): HSD130™ (standard), HT2000®, MAX200®, MAXPRO200®, Powermax125® 51 mm (2 in.): HPRXD®, HPR®, HT2000®, MAX200®, MAXPRO200® 57 mm (2-1/4 in.): XPR™ |
35 mm (1-3/8 in.): Powermax® 44 mm (1-3/4 in.): HSD130™ (standard), HT2000®, MAX200®, MAXPRO200®, Powermax125® 51 mm (2 in.): HPRXD®, HPR®, HT2000®, MAX200®, MAXPRO200® |
35 mm (1-3/8 in.) Powermax® 44 mm (1-3/4 in.): HSD130™ (standard), HT2000®, MAX200®, MAXPRO200®, Powermax125® 51 mm (2 in.): HT2000®, MAX200®, MAXPRO200® |
|||
Learn more | Learn more | Learn more |