HyPrecision 100D/150D waterjet pumps (D series)

Waterjet technology produces excellent fine-feature cut quality with low edge angularity, no heat-affected zone, a narrow kerf, and virtually dross-free cutting. It also offers the ability to process a variety of materials and a thickness range capability unmatched by other cutting technologies.

Incorporating proprietary Advanced Intensifier Technology (AIT), Hypertherm HyPrecision™ Waterjet Pumps are the hardest-working, most cost-effective waterjet pumps in the world. The D Series 100D and 150D products are our highest capacity waterjets. They include advanced control and monitoring features, and are engineered to deliver long-life reliability and uncompromised safety for the lowest cost of ownership.

Use the comparison chart to choose the HyPrecision system that will best suit your long-term needs

 

System information

Benefits

Extreme reliability

  • Built-in inlet water accumulator increases seal life by supplying constant water flow and pressure to the intensifier
  • Stepped water filtration (10, 1, .45 micron) improves water quality and extends seal life
  • Innovative piston design minimizes seal wear and improves component life

 Maximum energy efficiency

  • Totally enclosed force cooled (TEFC) electrical motor
  • Tube design
  • Standard water modulating valve provides cooling water

 


Specifications

  HyPrecision 100D HyPrecision 150D
  50 Hz 60 Hz 50 Hz 60 Hz
General
Maximum output flow 2.1 gpm (7.95 lpm) 2.2 gpm (8.33 lpm) 3.0 gpm (11.36 lpm) 3.2 gpm (12.11 lpm)
Maximum orifice 0.020" (0.508 mm) 0.021" (0.533 mm) 0.024" (0.610 mm) 0.025" (0.635 mm)
Continuous output pressure Adjustable to 60,000 psi (4137 bar)
Intensifier configuration Dual
Pressure control Electronic proportional
Bleed-down valve Hydraulic
Pump power
Motor Power 100hp (74.6 kW) 150hp (111.9 kW)
Voltage 400 V 460 V 400 V 460 V
Full load 138 A 117.5 A 204 A 173.4 A
Main breaker 150 A 225 A
Soft start True soft start
Physical
Overall width 45" (1143 mm) 55" (1397 mm)
Overall length 86" (2184 mm) 81" (2057 mm)
Overall height 56" (1422 mm) 56" (1422 mm)
Approximate operating weight 4150 lb (1882 kg) 6100 lb (2767 kg)
Options
  External air-over-oil cooling
Chiller for oil cooling
Water isolation valves Water and hydraulic isolation valves

Operating data

Orifice combinations supported by the HyPrecision pumps

HyPrecision 100D

Orifice sizein (mm)
1 orifice 0.020 (0.51)
2 orifices 0.014 (0.36)
3 orifices 0.011 (0.28)
4 orifices 0.010 (0.25)
5 orifices 0.009 (0.23)
6 orifices 0.008 (0.20)

HyPrecision 150D

Orifice sizein (mm)
1 orifice 0.024 (0.61)
2 orifices 0.017 (0.43)
3 orifices 0.014 (0.36)
4 orifices 0.012 (0.30)
5 orifices 0.011 (0.28)
6 orifices 0.010 (0.25)

Nozzle and Orifice Combinations

OrificeNozzleAbrasive (lb/min)Abrasive mesh
0.007 0.020 0.25 120 - 220
0.009 0.030 .4 - .6 80 - 120
0.010 0.030 .5 - .75 80 - 120
0.013 0.040 1.0 - 1.25 60 - 80
0.014 0.040 1.1 - 1.35 60 - 80
0.015 0.040 1.25 - 1.5 60 - 80
0.016 0.040 1.3 - 1.5 60 - 80

Typical combinations by pump size

HPQty headsOrifice/Nozzle
100 2 .014/.040
100 4 .010/.030
150 2 .017/.045
150 3 .014/.040
150 6 .010/.030

Power vs. flow for HyPrecision waterjet pumps

ModelPowerPressureMax. output flowMax. orifice size
  hp kW psi bar GPM L/min in mm
100D 100 74 60,000 4137 2.10 7.95 0.020 0.51
150D 150 110 60,000 4137 3.00 11.40 0.024 0.61
 

Buying information

Visit our where to buy page to find a potential partner, or contact Hypertherm directly if you need further assistance.

Resources

Manuals and documents

Related products