Upgrade to True Hole technology

Hypertherm's integrated plasma cutting solution brings $220,000 of outsourced cutting back in-house

Posted on 10/01/2016
Posted by Hypertherm

Company and products

Hutchinson Manufacturing is a large ISO 9001 compliant custom metal fabricator with 105 employees, doing business in Hutchinson, Minnesota since 1953. In addition to fabricating challenging custom jobs, Hutchinson Manufacturing also offers dedicated work cells in their 100,000 square foot facility for repeat contract manufacturing. Specialized to meet the demands of energy, gas and oil recovery industries, quality systems include 10CFR50 compliance to meet the stringent requirements of material dedication, testing and quarantine required by the nuclear industry.

Problem

The outdated cutting technology of two ten year old CO2 lasers and a 20 year old ESAB Sabre plasma gantry drove outsourcing costs to over $220,000 in two years. Material limitations of the systems and poor cut quality required any material thicknesses over 3/4" to be outsourced, which limited quality control and disrupted the production process. To meet the criteria for 10CFR50 compliance to grow their business in the nuclear industry, tight control of the cutting process with the ability to cut thicker materials, faster cut speeds, and significantly improved cut quality was needed. "Outsourcing so much cutting didn’t give us good control of our schedules and quality, so we needed to make a change. We needed reliability with consistent cut quality, and fast speeds to crank parts out," commented Isaac Marceau, Vice President of Operations.

Solution

Isaac was familiar with the Hypertherm name, and requested quotes from four cutting machine OEM’s. "The ESAB gantry was old and unreliable, with not enough power, and the newest laser was 10 years old. We understand proper engineering, so for our new cutting machine, we focused on precise motion and the rigidity of the designs." The solution that met their specific requirements for quality was the most expensive option, but still met their 2 – 3 year cost justification. The Hypertherm Integrated Plasma Cutting Solution they chose includes an HyPerformance Plasma HPR400XD, Hypertherm CNC and ProNest software. Working closely with their OEM through the entire process built the foundation for a longlasting partnership. This was evident when the cutting machine installation was simplified, and costs reduced, by Hutchinson building their own down-draft table with plans supplied by the OEM.

Benefits

"We saw immediate benefits from the investment, with cut speed improvements of 2 to 3 times over the lasers, and 3 to 4 times that of the old plasma," Isaac commented. Less heat buildup in the cuts has reduced warping, which was a recurring problem with the lasers when cutting thicker plate and the cleaner cuts have reduced any secondary processes by at least 50%. "Parts fit in vices with much less shimming, and we get higher part counts per shift with minimal rejects." These improvements have nearly eliminated outsourcing, reduced lead times, and enabled Hutchinson Manufacturing to extend production to two shifts.

"After using the system daily for 1-1/2 years, we are still finding new advantages to it. ProNest helps us measure outcomes and keep our scrap factor very low, and we pass the savings on to our customers. We’re considering cutting tubes, a new process for us, and training new operators takes less than 50% of the time it used to. With the Hypertherm CNC and Phoenix software, we can have a new operator up and running in two shifts. One shift for training, one shift for observations and on the third day they’re on their own and do well."

 

Posted on 10/01/2016
Posted by Hypertherm