D series HyPrecision waterjet pumps

Where to buy

About

Waterjet technology produces excellent fine-feature cut quality with low edge angularity, no heat-affected zone, a narrow kerf, and virtually dross-free cutting. It also offers the ability to process a variety of materials and a thickness range capability unmatched by other cutting technologies.

Incorporating proprietary Advanced Intensifier Technology (AIT), Hypertherm HyPrecision™ Waterjet Pumps are the hardest-working, most cost-effective waterjet pumps in the world. The D Series 100D and 150D products are our highest capacity waterjets. They include advanced control and monitoring features, and are engineered to deliver long-life reliability and uncompromised safety for the lowest cost of ownership.


Use the comparison chart to choose the HyPrecision system that will best suit your long-term needs

Type Waterjet systems
Product line HyPrecision
Material type Mild steel, stainless steel, aluminum, other (carbon fiber, glass, granite / stone / tile, foam, food, etc.)

Trouble-free operation

  • AIT extends maintenance intervals, reduces maintenance time and maximizes performance
  • Sophisticated electronics provide smooth, reliable shifting for optimum cut quality and pump performance
  • Powerful, intuitive software package gives operators all the information they need to maximize uptime
  • Service-friendly design simplifies high-pressure end removal for quick seal maintenance
  • Check valve utilizes a screwless, low-pressure poppet design that enables quick evaluation of key contact surfaces and allows faster routine servicing

Extreme reliability

  • Built-in inlet water accumulator increases seal life by supplying constant water flow and pressure to the intensifier
  • Stepped water filtration (10, 1, .45 micron) improves water quality and extends seal life
  • Innovative piston design minimizes seal wear and improves component life

Hassle-free hydraulic oil

  • Protective coating inside the hydraulic tank prevents rusting
  • Easy-access drain on the hydraulic tank makes oil changes quick and easy
  • Kidney loop oil cooling and filtration provides higher hydraulic system efficiency
  • Easy-access cover on the hydraulic tank makes for easy inspection and replacement of strainers (not available on 150D series)

 Maximum energy efficiency

  • Totally enclosed force cooled (TEFC) electrical motor
  • Tube design
  • Standard water modulating valve provides cooling water

 


 HyPrecision 100DHyPrecision 150D
 50 Hz60 Hz50 Hz60 Hz
General
Maximum output flow 2.1 gpm (7.95 lpm) 2.2 gpm (8.33 lpm) 3.0 gpm (11.36 lpm) 3.2 gpm (12.11 lpm)
Maximum orifice 0.020" (0.508 mm) 0.021" (0.533 mm) 0.024" (0.610 mm) 0.025" (0.635 mm)
Continuous output pressure Adjustable to 60,000 psi (4137 bar)
Intensifier configuration Dual
Pressure control Electronic proportional
Bleed-down valve Hydraulic
Pump power
Motor Power 100hp (74.6 kW) 150hp (111.9 kW)
Voltage 400 V 460 V 400 V 460 V
Full load 138 A 117.5 A 204 A 173.4 A
Main breaker 150 A 225 A
Soft start True soft start
Physical
Overall width 45" (1143 mm) 55" (1397 mm)
Overall length 86" (2184 mm) 81" (2057 mm)
Overall height 56" (1422 mm) 56" (1422 mm)
Approximate operating weight 4150 lb (1882 kg) 6100 lb (2767 kg)
Options
  External air-over-oil cooling
Chiller for oil cooling
Water isolation valves Water and hydraulic isolation valves

Orifice combinations supported by the HyPrecision pumps

HyPrecision 100D

Orifice sizein (mm)
1 orifice 0.020 (0.51)
2 orifices 0.014 (0.36)
3 orifices 0.011 (0.28)
4 orifices 0.010 (0.25)
5 orifices 0.009 (0.23)
6 orifices 0.006 (0.20)

HyPrecision 150D

Orifice sizein (mm)
1 orifice 0.024 (0.61)
2 orifices 0.017 (0.43)
3 orifices 0.014 (0.36)
4 orifices 0.012 (0.25)
5 orifices 0.011 (0.28)
6 orifices 0.010 (0.25)

Nozzle and Orifice Combinations

OrificeNozzleAbrasive (lb/min)Abrasive mesh
0.007 0.020 0.25 120 - 220
0.009 0.030 .4 - .6 80 - 120
0.010 0.030 .5 - .75 80 - 120
0.013 0.040 1.0 - 1.25 60 - 80
0.014 0.040 1.1 - 1.35 60 - 80
0.015 0.040 1.25 - 1.5 60 - 80
0.016 0.040 1.3 - 1.5 60 - 80

Typical combinations by pump size

HPQty headsOrifice/Nozzle
100 2 .014/.040
100 4 .010/.030
150 2 .017/.045
150 3 .014/.040
150 6 .010/.030

Power vs. flow for HyPrecision waterjet pumps

ModelPowerPressureMax. output flowMax. orifice size
  hp kW psi bar GPM L/min in mm
100D 100 74 60,000 4137 2.10 7.95 0.020 0.51
150D 150 110 60,000 4137 3.00 11.40 0.024 0.61
 

No reviews yet

Be the first to review the product.

Submit your review

Manuals & documents

View all

View privacy policy

optional

Why email? To send you a download link and provide follow-up support.

Why country? To help us track support needs by country.

Thank you for requesting our download. Please click the red arrows to download the document.

Visit our where to buy page to find a potential partner, or contact Hypertherm directly if you need further assistance.

Media

  • Advanced Intensifier Technology (AIT)

    03:50

Related Products

More from HyPrecision

Basic series HyPrecision waterjet pumps

HyPrecision

The Basic Series 15, 30, and 50 products are engineered to deliver long-life reliability and uncompromised safety for the lowest cost of ownership.

Read more

S series HyPrecision waterjet pumps

HyPrecision

The S Series 50S, 60S, and 75S products include advanced control and monitoring features, and are engineered to deliver long-life reliability and uncompromised safety for the lowest cost of ownership.

Read more