Basic series HyPrecision waterjet pumps

Where to buy

About

Waterjet technology produces excellent fine-feature cut quality with low edge angularity, no heat-affected zone, a narrow kerf, and virtually dross-free cutting. It also offers the ability to process a variety of materials and a thickness range capability unmatched by other cutting technologies.

Incorporating proprietary Advanced Intensifier Technology (AIT), Hypertherm HyPrecision™ Waterjet Pumps are the hardest-working, most cost-effective waterjet pumps in the world. The Basic Series 15, 30, and 50 products are engineered to deliver long-life reliability and uncompromised safety for the lowest cost of ownership.

 

Use the comparison chart to choose the HyPrecision system that will best suit your long-term needs

Type Waterjet systems
Product line HyPrecision
Material type Mild steel, stainless steel, aluminum, other (carbon fiber, glass, granite / stone / tile, foam, food, etc.)
Applications

Trouble-free operation

  • AIT extends maintenance intervals, reduces maintenance time and maximizes performance
  • Sophisticated electronics provide smooth, reliable shifting for optimum cut quality and pump performance
  • Powerful, intuitive software package gives operators all the information they need to maximize uptime
  • Service-friendly design simplifies high-pressure end removal for quick seal maintenance
  • Check valve utilizes a screwless, low-pressure poppet design that enables quick evaluation of key contact surfaces and allows faster routine servicing

Extreme reliability

  • Built-in inlet water accumulator increases seal life by supplying constant water flow and pressure to the intensifier
  • Stepped water filtration (1, .45 micron) improves water quality and extends seal life
  • Innovative piston design minimizes seal wear and improves component life

Hassle-free hydraulic oil

  • Protective coating inside the hydraulic tank prevents rusting
  • Easy-access drain on the hydraulic tank makes oil changes quick and easy
  • Kidney loop oil cooling and filtration provides higher hydraulic system efficiency
  • Easy-access cover on the hydraulic tank makes for easy inspection and replacement of strainers (not available on 150D series)

 Maximum energy efficiency

  • Totally enclosed force cooled (TEFC) electrical motor
  • Plate heat exchanger improves cooling efficiency
  • Optional water modulating valve provides cooling water only when needed

 HyPrecision 15HyPrecision 30HyPrecision 50
 50 Hz60 Hz50 Hz60 Hz50 Hz60 Hz
General
Maximum output flow 0.30 gpm (1.14 lpm) 0.60 gpm (2.27 lpm) 1.0 gpm (3.79 lpm)
Maximum orifice 0.007" (0.178 mm) 0.011" (0.279 mm) 0.014" (0.356 mm)
Continuous output pressure Adjustable to 60,000 psi (4137 bar)
Intensifier configuration Single
Pressure control Dual manual
Bleed-down valve Air
Pump power
Motor Power 15hp (11.2 kW) 30hp (22.4 kW) 50hp (37.3 kW)
Voltage 400 V 208-230/460 V 400 V 208-230/460 V 400 V 208-230/460 V
Full load 24 A 43-39/19 A 44 A 83-75/38 A 73 A 135-122/61 A
Main breaker 25 A 50/25 A 50 A 100/50 A 100 A 175/100 A
Soft start - - Wye-Delta
Physical
Overall width 34" (864 mm)
Overall length 70" (1778 mm)
Overall height 46" (1168 mm)
Approximate operating weight 2900 lb (1315 kg)
Options
  External air-over-oil cooling
Chiller for oil cooling
Water modulating valve
External boost pump

Orifice combinations supported by the HyPrecision pumps

HyPrecision 15

Orifice sizein (mm)
1 orifice 0.007 (0.18)
2 orifices 0.005 (0.13)
3 orifices 0.004 (0.10)
4 orifices -
5 orifices -
6 orifices -

HyPrecision 30

Orifice sizein (mm)
1 orifice 0.011 (0.28)
2 orifices 0.007 (0.18)
3 orifices 0.006 (0.15)
4 orifices 0.005 (0.13)
5 orifices 0.004 (0.10)
6 orifices 0.004 (0.10)

HyPrecision 50

Orifice sizein (mm)
1 orifice 0.014 (0.35)
2 orifices 0.010 (0.25)
3 orifices 0.008 (0.20)
4 orifices 0.007 (0.18)
5 orifices 0.006 (0.15)
6 orifices 0.005 (0.13)

Nozzle and Orifice Combinations

OrificeNozzleAbrasive (lb/min)Abrasive mesh
0.007 0.020 0.25 120 - 220
0.009 0.030 .4 - .6 80 - 120
0.010 0.030 .5 - .75 80 - 120
0.013 0.040 1.0 - 1.25 60 - 80
0.014 0.040 1.1 - 1.35 60 - 80
0.015 0.040 1.25 - 1.5 60 - 80
0.016 0.040 1.3 - 1.5 60 - 80

Typical combinations by pump size

HPQty headsOrifice/Nozzle
30 1 .010/.030
30 2 .006 water
50 1 .014/.040
50 2 .010/.030

Power vs. flow for HyPrecision waterjet pumps

ModelPowerPressureMax. output flowMax. orifice size
  hp kW psi bar GPM L/min in mm
15 15 11.2 60,000 4137 0.24 0.90 0.007 0.18
30 30 22 60,000 4137 0.60 2.30 0.011 0.28
50 50 37 60,000 4137 1.00 3.80 0.014 0.35
 

No reviews yet

Be the first to review the product.

Submit your review

Manuals & documents

View all

View privacy policy

optional

Why email? To send you a download link and provide follow-up support.

Why country? To help us track support needs by country.

Thank you for requesting our download. Please click the red arrows to download the document.

Maintenance

View all

Training

View all

Visit our where to buy page to find a potential partner, or contact Hypertherm directly if you need further assistance.

Media

  • Advanced Intensifier Technology (AIT)

    03:50

Related Products

More from HyPrecision

S series HyPrecision waterjet pumps

HyPrecision

The S Series 50S, 60S, and 75S products include advanced control and monitoring features, and are engineered to deliver long-life reliability and uncompromised safety for the lowest cost of ownership.

Read more

D series HyPrecision waterjet pumps

HyPrecision

The D Series 100D and 150D products are our highest capacity waterjets. They include advanced control and monitoring features, and are engineered to deliver long-life reliability and uncompromised safety for the lowest cost of ownership.

Read more