Operator and instruction manuals (6)

Specifications

For full specifications, reference the manual.

Mild steel cut capacity Dross free
Production pierce
Maximum cutting capacity
32 mm (1-1/4")
38 mm (1-1/2")
64 mm (2-1/2")
Stainless steel cut capacity Production pierce
Maximum cutting capacity
32 mm (1-1/4")
50 mm (2")
Aluminum cut capacity Production pierce
Maximum cutting capacity
25 mm (1")
50 mm (2")
Speed
(Mild steel)
Book specification at highest output current 12 mm (1/2")
3850 mm/m (145 ipm)
Cut angle ISO 9013 range* 2-4
Weldability   Ready to weld
Process gases by material
(Plasma/shield)
Mild steel


Stainless steel


Aluminum

02/Air, 02/02, Ar/Air

H35/N2, N2/N2, H35-N2/N2, F5/N2,
Ar/Air, Ar/N2

H35/N2, Air/Air, H35-N2/N2, Ar/Air, Ar/N2

Process amps
(Cutting)
Not all processes available for all materials 30-260

* ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.

Consumables

Please contact an authorized Hypertherm distributor to place your consumables order.

HPR260XD torch

HPRXD torch

HPR informational package

Get more from your consumables with a free informational package for owners and operators of HPR or HPRXD systems. You'll learn:

  • The role each consumable plays in your final stack-up
  • How to properly care for each consumable type
  • When to change out your electrode, nozzle, shield, and more
 

HPR260XD consumables

Nozzles and electrodes are available in various quantities. Please contact an authorized Hypertherm distributor to place your consumables order.

 

Mild steel

Your consumables may not look exactly like the pictures. Learn more about SilverPlus electrode.

Shield cap Shield Nozzle retaining cap Nozzle Swirl Ring Electrode Water tube 260 amp Torch consumable parts

260 amp consumables - mild steel

 

Amperage Shield
cap
Shield Nozzle
retaining cap
Nozzle Swirl ring Electrode SilverPlus
electrode
Water tube
30 A 220747 220194 220754 220193 220180 220192 ______ 220340
50 A 220747 220555 220754 220554 220553 220552 ______ 220340
80 A 220747 220189 220756 220188 220179 220187 420566 220340
130 A 220747 220183 220756 220182 220179 220181 220665 220340
200 A 220637 220761 220757 220354 220353 220352 220666 220340
260 A 220637 220764 220760 220439 220436 220435 220668 220340
80 A bevel 220637 220742 220845 220806 220179 220802 ______ 220700
130 A bevel 220637 220742 220740 220646 220179 220649 ______ 220700
200 A bevel 220637 220658 220845 220659 220353 220662 ______ 220700
260 A bevel 220637 220741 220740 220542 220436 220541 ______ 220571
* 260 A bevel 220637 220897 220896 220898 220436 220899 ______ 220571

* Recommended for use if you have excessive slag, or the torch is misfiring, when using standard consumables.

 

Stainless steel

Your consumables may not look exactly like the pictures.

Shield cap Shield Nozzle retaining cap Nozzle Swirl Ring Electrode Water tube 260 amp Torch consumable parts

260 amp - stainless steel - above 4" thick

 

Amperage Shield
cap
Shield Nozzle
retaining cap
Nozzle Swirl ring Electrode SilverPlus Water tube
45 A 220747 220202 220755 220201 220180 220308   220340
60 A HDi 220747 220815 220814 220847 220180 220339   220340
80 A 220747 220338 220755 220337 220179 220339   220340
130 A 220747 220198 220755 (H35) 220197 220179 220307   220340
      220756 (N2)          
200 A 220637 220762 220758 220343 220342 220307   220340
260 A 220637 220763 220758 220406 220405 220307   220340
130 A bevel 220637 220738 220739 220656 220179 220606   220571
260 A bevel 220637 220738 220739 220607 220405 220606   220571

 

Aluminum

Your consumables may not look exactly like the pictures.

Shield cap Shield Nozzle retaining cap Nozzle Swirl Ring Electrode Water tube 260 amp Torch consumable parts

260 amp - aluminum consumables - above 4" thick

 

Amperage Shield
cap
Shield Nozzle
retaining cap
Nozzle Swirl ring Electrode SilverPlus Water tube
45 A 220747 220202 220756 220201 220180 220308   220340
130 A 220747 220198 220755 (H35) 220197 220179 220307 (H35)   220340
      220756 (Air)     220181 (Air)  
200 A 220637 220762 220759 220346 220342 220307   220340
260 A 220637 220763 220758 220406 220405 220307   220340

HPR260XD starter kits

Designed especially for your HPR260XD system, the Hypertherm consumable kit contains all the necessary consumables and accessories you need to get up-and-cutting. Customers can choose either mild or stainless steel/aluminum consumable starter kits.

Kit type (MS) HPR260XD mild steel starter kit (260 A and below)
Kit part number 228422
Description Kit contains all the necessary consumables and accessories for mild steel cutting at 260 A and below
Kit type (MS) HPR260XD mild steel bevel starter kit (260 A and below)
Kit part number 428627
Description Kit contains all the necessary consumables and accessories for mild steel bevel cutting at 260 A and below
Kit type (AL/SS) HPR260XD aluminum and stainless steel starter kit (260 A and below)
Kit part number 228423
Description Kit contains all the necessary consumables and accessories for aluminum and stainless steel cutting at 260 A and below

Upgrades

SilverPlus electrodes

SilverPlusĀ® electrodes last over two times longer than standard copper electrodes  significantly lower operating costs and reducing the number of changeouts.

Read more

XPR300 plasma cutting system

Cut faster and use fewer consumables with the new XPR300 mechanized plasma cutting system. Meet the new plasma.

Read more

Field service bulletins (10)

Showing 10 of 10 documents

Showing of 10 documents

Show all