Operator and instruction manuals (10)

Showing 10 of 10 documents

Showing of 10 documents

Show all 

Specifications

For full specifications, reference the manual.

Cut capacity

Capacity Thickness Cut speed
Recommended 25 mm (1″) 500 mm/min (20 ipm)
  32 mm (1-1/4″) 250 mm/min (10 ipm)
Severance (hand cutting) 38 mm (1-1/2″) 125 mm/min (5 ipm)
Pierce* 20 mm (3/4″)  

*Pierce rating for handheld cutting, or mechanized cutting with programmable torch height control.

 

Maximum removal gouging

Capacity Metal removal rate Gouge profile
Typical gouge 8.2 kg (18.2 lbs.) per hour 3.5 mm D x 6.6 mm W (0.14″ D x 0.26″ W)

General specifications

Input voltages

200–480 V, 1-PH, 50/60 Hz

200–600 V, 3-PH, 50/60 Hz

Kilowatt output

12.2 kW

Input current

200/208/240/480,

1-PH 70/68/58/29 A @ 12.2 kW

200/208/240/480/600 V,

3-PH 42/40/35/18/17 A @ 12.2 KW

Output current

25–85 A

Rated output voltage

143 VDC

Duty cycle @ 104° F

60% @ 85 A, 230–600 V, 3-PH

60% @ 85 A, 480 V, 1-PH

50% @ 85 A 240 V, 1-PH

50% @ 85 A, 200–208 V, 3-PH

40% @ 85 A, 200–208 V, 1-PH

100% @ 66 A, 230–600 V, 1/3-PH

Open circuit voltage (OCV)

305 VDC

Dimensions with handles

483 mm D; 233 mm W; 430 mm H (19″ D; 9.2″ W; 17″ H)

Weight w/7.6 m (25′) torch

32 kg (67 lbs.)

Gas supply

Clean, dry, oil-free air or nitrogen

Optimum inlet gas pressure

7.6–8.3 bar (110–120 psi)

Minimum inlet gas pressure

5.2 bar (75 psi)

Recommended inlet gas flow rate

Cutting: 210 I/min @ 5.9 bar (450 scfh, 7.5 scfm @ 85 psi)

Gouging: 210 I/min @ 4.8 bar (450 scfh, 7.5 scfm @ 70 psi)

Input power cable length

3 m (10′)

Power supply type

Inverter–IGBT

Engine drive requirement

20 kW for full 85 A output

Certifications

CSA-certified for use in the Americas and Asia, except China

Warranty

Power supplies have a 3-year warranty and torches a 1-year warranty

Consumables

Please contact an authorized Hypertherm distributor to place your consumables order.

CARTRIDGE-85-Drag-Fine-Hand

Drag cutting and FineCut for hand torches

Hypertherm cartridges

Process

Cartridge

85 A

428935

65 A

428931

45 A

428927

FineCut® drag cutting

428928

CARTRIDGE-85-Mech-standoff-Fine

Mechanized and FineCut for machine torches

Hypertherm cartridges

Process

Cartridge

85 A

428934

65 A

428930

45 A

428925

FineCut® mechanized cutting

428926

Ohmic ring kit

428895

(contains 3 #420580 ohmic rings)

Mechanized cartridges can be used on hand torches if a stand-off is desired.

CARTRIDGE-85-MaxControlRemoval-Mech

Max removal and max control gouging

Hypertherm cartridges

Process

Cartridge

Max removal gouging 45–85 A

428932

Max control gouging 45–85 A

428933

CARTRIDGE-85-Flushcut

FlushCut

Hypertherm cartridges

Process

FlushCut™

85 A

428953

65 A

428952

Accessories

Hypertherm cartridge reader

The Hypertherm cartridge reader provides a simple process for reviewing data stored in Hypertherm cartridges. Data analysis helps customers understand cartridge utilization and identify operator training opportunities.

Read more

Field service bulletins (2)