Operator and instruction manuals (3)

Showing 3 of 3 documents

Showing of 3 documents

Service manuals (2)

Showing 2 of 2 documents

Showing of 2 documents

Specifications

For full specifications, reference the manual.

Input voltages
(± 10%)
CSA 200 – 240 V, 1-PH, 50-60 Hz
OR
480 V, 3-PH, 50-60 Hz1
CE/CCC 230 V, 1-PH, 50-60 Hz
OR
400 V, 3-PH, 50-60 Hz
Input current
@ 6.5 kW
CSA 200 - 240 V, 1-PH, 39/32 A
OR
480 V, 3-PH, 9.4 A1
CE/CCC 230 V, 1-PH, 33 A
OR
400 V, 3-PH, 10 A
Output current 10–45 A
Rated output voltage 145 VDC
Duty cycle
@ 40° C (104° F)
CSA

50% @ 45 A, 200 – 240 V, 1-PH
60% @ 41 A, 200 – 240 V, 1-PH
100% @ 32 A, 200 – 240 V, 1-PH
50% @ 45 A, 480 V, 3-PH
60% @ 41 A, 480 V, 3-PH
100% @ 32 A, 480 V, 3-PH

CE/CCC 50% @ 45 A, 230 V, 1-PH
60% @ 41 A, 230 V, 1-PH
100% @ 32 A, 230 V, 1-PH
50% @ 45 A, 400 V, 3-PH
60% @ 41 A, 400 V, 3-PH
100% @ 32 A, 400 V, 3-PH
Open circuit voltage (OCV) 275 VDC (200 - 240 V, CSA/CE/CCC and 480 V, CSA)
265 VDC (400 V CE/CCC)
Dimensions with handles 442 mm (17.4") D; 173 mm (6.8") W; 357 mm (14.1") H
Weight with 6.1 m (20') torch CSA 14 kg (31 lbs.)
CE/CCC 15 kg (33 lbs.)
Gas supply Cutting: air (clean, dry and oil-free), nitrogen, F5
Gouging: air (clean, dry and oil-free), nitrogen, F5
Marking: air (clean dry and oil-free) argon
Recommended
gas inlet
flow rate / pressure
188 I/min (400 scfh) @ 5,9 bar (90 psi)
Input power cable length 3 m (10')
Power supply type Inverter – IGBT
Engine drive requirement 12.5 kVA (10 kW) for full 45 A output
Electrical efficiency 88%
Recyclability 100%
Certifications CSA certified for use in the Americas and Asia, except China. CCC for use in China. CE, RCM, GOST-TR, UkrSEPRO, and Serbian AAA for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
Warranty Power supply: 3-year
Torch: 1-year

1 For use in North America only.

Engine-driven generator operation

Engine drive rating System output current Performance (arc stretch)
10 kW 45 A Full
8 kW 45 A Limited
6 kW 30 A Full

Cut capacity

Capacity Thickness Cut speed
  Cutting
Recommended 16 mm (5/8")
22 mm (7/8")
500 mm/min (20 ipm)
250 mm/min (10 ipm)
Severance (hand cutting) 29 mm (1-1/8") 125 mm/min (5 ipm)
Pierce* 12 mm (1/2")  

* Pierce rating for handheld use or with automatic torch height control

Capacity Metal removal rate Groove profile
  Gouging
Typical gouge 3,4 kg (7.5 lbs.) per hour 3,2 mm (.12") D x 6,8 mm (.26") W

Production cut chart

Material Thickness
inches
Current
amps
Production cut speed*
ipm
Mild steel 10 GA 45 181
1/4 45 72
3/8 45 38
1/2 45 24
5/8 45 16
Stainless steel 10 GA 45 134
1/4 45 59
3/8 45 29
1/2 45 19
5/8 45 13
Aluminum 1/8 45 263
1/4 45 104
3/8 45 42
1/2 45 26
5/8 45 14
Material Thickness
mm
Current
amps
Production cut speed*
mm/min
Mild steel 3 45 5590
6 45 2110
10 45 920
12 45 690
16 45 400
Stainless steel 3 45 4725
6 45 1695
10 45 870
12 45 540
16 45 320
Aluminum 3 45 7120
6 45 3095
10 45 1015
12 45 745
16 45 340

* Production cut speeds are the results of Hypertherm's laboratory testing. For optimum cut performance, actual cutting speeds may vary based on different cutting applications. Refer to the operator manual for more details.

 

 Environmental stewardship is a core value of Hypertherm. Our Powermax products are engineered to meet and exceed global environmental regulations including the RoHS directive.

Consumables

Please contact an authorized Hypertherm distributor to place your consumables order.

Extended reach cutting

Extended reach gouging

Fine feature cutting

Flush cutting

TorchOperating rangeRetaining ringNozzle/shieldRetaining capElectrodeSwirl ring
Duramax Lock Torches - Hand - 15° 30 A - 45 A 420540 420633 420536 420635 420634
Duramax Lock Torches - Hand - 75° 30 A - 45 A 420540 420633 420536 420635 420634
Duramax Lock Torches - Machine - 180° 30 A - 45 A 420540 420633 420536 420635 420634

Max control gouging

Mechanized cutting

TorchOperating rangeShield / DeflectorRetaining cap / Retaining cap (ohmic)NozzleElectrodeSwirl ring
Duramax Lock Torches - Machine - 180° 15 A - 45 A 220817 / 220955 (Unshielded deflector) 220854 / 220953 (Ohmic) 220941 220842 / 220777 (CopperPlus long life upgrade) 220857

Precision gouging

Upgrades

ProNest 2021 LT

ProNest® LT (formerly known as TurboNest®) is a material nesting software designed for light industrial, mechanized cutting in production environments.

Read more

Accessories

Air filtration kits

Hypertherm air filtration kits protect Powermax systems against contaminated air and moisture from air lines.

Read more

Leather torch sheaths

The Hypertherm leather torch sheath provides additional protection for torch leads against cuts, burn-through and abrasion.

Read more

Plasma circle cutting guide

Plasma circle cutting guides cut circles up to 28” in diameter.

Read more

Rolling tool bag

The rugged rolling tool bag is for protecting and transporting the Powermax30® XP, 30 AIR, 45, and 45 XP plasma cutting systems and accessories. The bag comes in black with a Hypertherm logo.

Read more

System dust covers

Hypertherm system dust covers are made from a flame-retardant vinyl designed to protect your Powermax plasma cutting system from dust and dirt.

Read more

Field service bulletins (10)

Showing 10 of 10 documents

Showing of 10 documents

Show all