Operator and instruction manuals (3)

Showing 3 of 3 documents

Showing of 3 documents

Service manuals (1)

Showing 1 of 1 documents

Showing of 1 documents

Specifications

For full specifications, reference the manual.

Input voltages 120-240 V, 1-PH, 50/60 Hz
Input current @ 3.8 kW 120-240 V, 1-PH, 25-18.8 A
Output current 15-30 A
Rated output voltage 125 VDC
Duty cycle @ 40°C (104°F) 35%, 240 V
20%, 120 V
Open circuit voltage (OCV) 256 VDC
Dimensions with handles 356 mm (14.0") D; 168 mm (6.6") W; 305 mm (12.0") H
Weight w/ 4,5 m (15') torch CSA: 9.7 kg (21.4 lbs)
CE, CCC: 9.5 kg (21 lbs)
Gas Supply Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure
113.3 l/min (4 scfm) at 5.5 bar (80 psi)
Input power cable length 3 m (10')
Power supply type Inverter - IGBT
Engine drive requirement 5.5 kW for full 30 A output
Certifications CSA-certified for use in the Americas and Asia, except China
CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
CCC for use in China.
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.

 

 

Environmental stewardship is a core value of Hypertherm. Our Powermax products are engineered to meet and exceed global environmental regulations including the RoHS directive.

Consumables

Please contact an authorized Hypertherm distributor to place your consumables order.

Drag cutting

TorchOperating rangeShieldRetaining capNozzleElectrodeSwirl ring
Duramax LT torch - Hand - 75° 15 A - 30 A 420116 420114 420118 420120 420211

Extended reach cutting

TorchOperating rangeRetaining capNozzle/shieldElectrodeSwirl ring
Duramax LT torch - Hand - 75° 15 A - 30 A 420148 420144 420137 420211

Extended reach gouging

TorchOperating rangeRetaining capNozzle/shieldElectrodeSwirl ring
Duramax LT torch - Hand - 75° 15 A - 30 A 420148 420147 420137 420211

Fine feature cutting

TorchOperating rangeShieldRetaining capNozzleElectrodeSwirl ring
Duramax LT torch - Hand - 75° 15 A - 30 A 420115 420114 420117 420120 420211

Accessories

Adjustable eye shades

The Hypertherm adjustable eye shades are designed for use with < 40 amp plasma cutting systems.

Read more

Arc-rated metalworking jersey

The Hypertherm arc-rated metalworking jersey is top quality washable welder wear made from modacrylic fabric for flame and arc flash resistance.

Read more

Cutting goggles

The Hypertherm cutting have shade 5 for plasma cutting up to 40 amps.

Read more

Field service bulletins (15)

Showing 15 of 15 documents

Showing of 15 documents

Show all