Operator and instruction manuals (3)

Showing 3 of 3 documents

Showing of 3 documents

Service manuals (1)

Showing 1 of 1 documents

Showing of 1 documents

Specifications

For full specifications, reference the manual.

Input voltages 120-240 V, 1-PH, 50/60 Hz
Input current @ 2.5 kW 120-240 V, 1-PH, 29-15 A
Output current 15-30 A
Rated output voltage 83 VDC
Duty cycle @ 40°C (104°F) 35%, 240 V
20%, 120 V
Open circuit voltage (OCV) 256 VDC
Dimensions with handles 420 mm (16.5") D; 195 mm (7.7") W; 333 mm (13.1") H
Weight w/ 4,5 m (15') torch 13.5 kg (29.8 lbs)
Input power cable length 3 m (10')
Power supply type Inverter - IGBT
Engine drive requirement 5.5 kW for full 30 A output
Certifications CSA-certified for use in the Americas and Asia, except China CE, C-Tick, CU/GOST, Ukr, and Serbian — for use in Europe, Australia, Belarus, Kazakhstan, Russia, Serbia, Ukraine, and other countries where accepted.
Warranty Power supplies have a 3-year warranty and torches a 1-year warranty.

Cut capacity

Capacity Thickness Cut speed
 

Cutting

Recommended 8 mm (5/16") 500 mm/min (20 ipm)
  10 mm (3/8") 250 mm/min (10 ipm)
Severance 16 mm (5/8") 125 mm/min (5 ipm)

Cutting with 120 V input power

The maximum recommended output of 20 A, the cut capacities are:

  • 3 mm (10 gauge) at 762 mm/min (30 ipm)
  • 6 mm (1/4") at 355 mm/min (14 ipm)
  • 10 mm (3/8") at 125 mm/min (5 ipm)

Environmental stewardship is a core value of Hypertherm. Our Powermax products are engineered to meet and exceed global environmental regulations including the RoHS directive.

Consumables

Please contact an authorized Hypertherm distributor to place your consumables order.

Drag cutting

TorchOperating rangeDeflectorRetaining capNozzleElectrodeSwirl ring
T AIR Torches - Hand - 75° 15 A - 30 A 420399 420135 420134 420132 420133

Accessories

Adjustable eye shades

The Hypertherm adjustable eye shades are designed for use with < 40 amp plasma cutting systems.

Read more

Cutting goggles

The Hypertherm cutting have shade 5 for plasma cutting up to 40 amps.

Read more

Flip-up eye shades

The Hypertherm flip-up eye shades have shade 5 for plasma cutting up to 40 amps.

Read more

Hyamp cutting and gouging gloves

Hyamp cutting and gouging gloves are insulated for heavy duty applications.

Read more

Leather neck guards

The Hypertherm leather neck guard easily attaches to any welding helmet or face shield to block spatter and debris.

Read more

Plasma circle cutting guide

Plasma circle cutting guides cut circles up to 28” in diameter.

Read more

System dust covers

Hypertherm system dust covers are made from a flame-retardant vinyl designed to protect your Powermax plasma cutting system from dust and dirt.

Read more