HyPrecision 100D/150D waterjet pumps (D series)
Operator and instruction manuals (6)
AccuValve on/off valve, A2 cutting head, and DiaLine cutting head - Instruction manual (Revision 0)
Last updated
05/15/2019
Part number: 810700
PDF (5.08MB)
Attenuator guard for 60-hp, 75-hp, 100-hp, 125-hp, and 150-hp pumps with redundant intensifiers - Installation guide (Revision 0)
Last updated
05/15/2019
Part number: 809640
PDF (4.99MB)
Showing 6 of 6 documents
Specifications
For full specifications, reference the manual.
| HyPrecision 100D | HyPrecision 150D | |||
|---|---|---|---|---|
| 50 Hz | 60 Hz | 50 Hz | 60 Hz | |
| General | ||||
| Maximum output flow | 2.1 gpm (7.95 lpm) | 2.2 gpm (8.33 lpm) | 3.0 gpm (11.36 lpm) | 3.2 gpm (12.11 lpm) |
| Maximum orifice | 0.020" (0.508 mm) | 0.021" (0.533 mm) | 0.024" (0.610 mm) | 0.025" (0.635 mm) |
| Continuous output pressure | Adjustable to 60,000 psi (4137 bar) | |||
| Intensifier configuration | Dual | |||
| Pressure control | Electronic proportional | |||
| Bleed-down valve | Hydraulic | |||
| Pump power | ||||
| Motor Power | 100hp (74.6 kW) | 150hp (111.9 kW) | ||
| Voltage | 400 V | 460 V | 400 V | 460 V |
| Full load | 138 A | 117.5 A | 204 A | 173.4 A |
| Main breaker | 150 A | 225 A | ||
| Soft start | True soft start | |||
| Physical | ||||
| Overall width | 45" (1143 mm) | 55" (1397 mm) | ||
| Overall length | 86" (2184 mm) | 81" (2057 mm) | ||
| Overall height | 56" (1422 mm) | 56" (1422 mm) | ||
| Approximate operating weight | 4150 lb (1882 kg) | 6100 lb (2767 kg) | ||
| Options | ||||
| External air-over-oil cooling | ||||
| Chiller for oil cooling | ||||
| Water isolation valves | Water and hydraulic isolation valves | |||
Orifice combinations supported by the HyPrecision pumps
HyPrecision 100D
| Orifice size | in (mm) |
|---|---|
| 1 orifice | 0.020 (0.51) |
| 2 orifices | 0.014 (0.36) |
| 3 orifices | 0.011 (0.28) |
| 4 orifices | 0.010 (0.25) |
| 5 orifices | 0.009 (0.23) |
| 6 orifices | 0.008 (0.20) |
HyPrecision 150D
| Orifice size | in (mm) |
|---|---|
| 1 orifice | 0.024 (0.61) |
| 2 orifices | 0.017 (0.43) |
| 3 orifices | 0.014 (0.36) |
| 4 orifices | 0.012 (0.30) |
| 5 orifices | 0.011 (0.28) |
| 6 orifices | 0.010 (0.25) |
Nozzle and Orifice Combinations
| Orifice | Nozzle | Abrasive (lb/min) | Abrasive mesh |
|---|---|---|---|
| 0.007 | 0.020 | 0.25 | 120 - 220 |
| 0.009 | 0.030 | .4 - .6 | 80 - 120 |
| 0.010 | 0.030 | .5 - .75 | 80 - 120 |
| 0.013 | 0.040 | 1.0 - 1.25 | 60 - 80 |
| 0.014 | 0.040 | 1.1 - 1.35 | 60 - 80 |
| 0.015 | 0.040 | 1.25 - 1.5 | 60 - 80 |
| 0.016 | 0.040 | 1.3 - 1.5 | 60 - 80 |
Typical combinations by pump size
| HP | Qty heads | Orifice/Nozzle |
|---|---|---|
| 100 | 2 | .014/.040 |
| 100 | 4 | .010/.030 |
| 150 | 2 | .017/.045 |
| 150 | 3 | .014/.040 |
| 150 | 6 | .010/.030 |
Power vs. flow for HyPrecision waterjet pumps
| Model | Power | Pressure | Max. output flow | Max. orifice size | ||||
|---|---|---|---|---|---|---|---|---|
| hp | kW | psi | bar | GPM | L/min | in | mm | |
| 100D | 100 | 74 | 60,000 | 4137 | 2.10 | 7.95 | 0.020 | 0.51 |
| 150D | 150 | 110 | 60,000 | 4137 | 3.00 | 11.40 | 0.024 | 0.61 |
Field service bulletins (1)
PLC update 10304: automatic start procedure for HyPrecision 100D/150D and HyPrecision 50S/60S/75S waterjet pumps - Field service bulletin (Revision 0)
Last updated
02/25/2020
Part number: 810040
PDF (2.14MB)
Showing 1 of 1 documents