Table slats are literally the foundation of plasma cutting and no amount of plasma optimization can counteract an offset plate. This blog ... Read more
11
May
2020
Table slats are literally the foundation of plasma cutting and no amount of plasma optimization can counteract an offset plate. This blog ... Read more
26
September
2019
Damaged consumables can be the cause of several performance issues and operators are surprised when they learn the damage was caused by the ... Read more
07
August
2019
It’s probably no surprise there are dishonest people out there who make and sell counterfeit Hypertherm consumables. We’ve seen it with our ... Read more
26
February
2019
Although the new QuickLock XPR electrode is quick and easy to install (and feels like it should be tool-less), you still need the ... Read more
30
January
2019
Hypertherm’s Technical Service Team is happy to troubleshoot issues and provide guidance, customers can often achieve better cutting ... Read more
22
January
2019
Due to their small size, low cost, and straightforward design, the vital function of an O-ring is frequently overlooked and regular ... Read more
22
July
2014
Making good-quality holes with plasma is easier than ever with Hypertherm’s True Hole technology, but what if you don't have True Hole? Read more
01
July
2014
Up next in our series on "Acceptable vs. non-acceptable consumable wear" is the swirl ring. The swirl ring's job is to control and swirl ... Read more
24
June
2014
By now you've hopefully read our post on the electrode. The next consumable we are going to cover in our series on acceptable vs. ... Read more
18
June
2014
Following a recent post on consumables (Controlling the cost of consumables) we had a request to post pictures so you could see what ... Read more