Training opportunities for 2008
Business partner training
Business Partner Traing Brochure 2008 PDF (1 MB)
Information is a key ingredient in customer satisfaction. Your customers expect you to have it, but where do you get the information you need? As a Hypertherm business partner, a variety of training opportunities are available to you to increase your knowledge of plasma cutting technology and the Hypertherm product line. Hypertherm training seminars provide you with the information you need to better satisfy your customers needs.
In-house seminars
In-house seminars are held at our world headquarters in Hanover, New Hampshire. There are no fees for our in-house seminars. While you're in Hanover, Hypertherm provides all books and supplies, all lunches and a "networking" dinner one evening. Airfare, hotel and transportation costs are the responsibility of the visitor. Upon receipt of your completed registration form, Hypertherm will send you enrollment confirmation and a list of lodging options in the area. Don't delay. These trainings will fill up quickly! For more information, contact the Customer Training Team at Hypertherm.
Sales training seminars for 2008
Manual systems sales training
February 19th and 20th
August 19th and 20th
This two-day seminar covers all aspects of Hypertherm manual systems sales, inclusive of the Powermax line. This training is designed to educate new to intermediate distributor sales personnel, as well as offer updated product information for more experienced sales representatives. During the event, Hypertherm will offer you a blended learning experience consisting of product workshops, interactive exercises with time for Q & A, a significant amount of hands-on lab time to demonstrate the important techniques and processes for hand plasma cutting and safety, and the opportunity to meet with leaders at Hypertherm. We will also take an extensive tour of the 130,000-square foot main plant facility.
Key topics include: |
Plasma theory, safety, and basic troubleshooting
Power supply and torch technologies
System features, benefits, and value to your Customer
Basic operation and demonstration
Competitive comparisons
Systems covered:
Powermax190c
Powermax30
Powermax600
Powermax1000
Powermax1250
Powermax1650
If interested in this training, please email the Customer Training Team or call (800) 643-0030.
Mechanized systems sales training
May 20th and 21st
October 21st and 22nd
This two-day seminar is designed to familiarize our business partners with the latest innovations and technologies as well as the most current sales tools for our mechanized product line. During the event, Hypertherm will offer you a blended learning experience consisting of product workshops, interactive exercises with time for Q & A, a significant amount of lab time to better understand the functions and capabilities of the cutting table components, and the opportunity to meet with leaders at Hypertherm. We will also take an extensive tour of the 130,000-square foot main plant facility.
Key topics include:
Hypertherm Mechanized technologies
System overviews including cut expectations
Competitive processes and systems
Hypertherm Automation
Basic troubleshooting
Systems covered:
Mechanized Powermax MAX200
HSD130
HT2000 HT4400
HT4001
HPR130 and HPR260
If interested in this training, please email the Customer Training Team or call (800) 643-0030.
Manual systems service
training
April 22nd and 23rd
September 23rd and 24th
This two-day course is
designed for distributor, and other qualified,
repair personnel familiar with electro-mechanical
equipment maintenance, troubleshooting and
repair.
Key topics covered: |
|
Plasma fundamentals
Torch and power supply technologies
Common service issues
Troubleshooting tips and tools
Preventive maintenance
Systems covered:
Powermax190c
Powermax30
Powermax600
Powermax1000
Powermax1250
Powermax1650
MAX200
If interested in this training, please email the Customer Training Team or call (800) 643-0030.
Introduction to mechanized service
April 24th
September 25th
Offered at the end of the manual systems service training, this is a one-day course intended for experienced service people who have an interest in mechanized plasma cutting machines and processes. The HT2000 will
be the example machine.
|
Key topics covered:
Mechanized survey course Basics of cutting systems Mechanized sub-systems Typical sequence of operations Basic troubleshooting Preventive maintenance fundamentals
Mechanized systems service: Level I
March 4th, 5th and 6th
May 13th, 14th and 15th
October 28th, 29th and 30th
This three-day course is designed to provide qualified service personnel with the basic information necessary to maintain and repair Hypertherm mechanized plasma cutting systems. This course is for service and repair technicians with little or no experience with our systems.
|
|
Key topics covered:
Mechanized plasma cutting systems in overview
Technical review of current Hypertherm systems
Design and function of power supply subsystems
Using the sequence of operations in system troubleshooting
Standard operating techniques and cutting processes
Systems covered:
MAX200
HSD130
HT2000 HT4400
HT4001
HPR130 and HPR260
If interested in this training, please email the Customer Training Team or call (800) 643-0030.
Mechanized systems service training: Level II
June 24th, 25th and 26th THIS CLASS IS FULL. NO MORE ATTENDEES.
December 9th, 10th and 11th
This advanced three-day course is designed to provide in-depth technical coverage of our current systems. Technicians with experience repairing and/or installing our systems are candidates for this higher level course.
Key topics covered:
Installation issues
Advanced systems maintenance and repair
Design and function of power supply subsystems
Using the sequence of operations in system troubleshooting
Providing operator training
Systems covered:
MAX200
HT2000
HSD130
HT4400
HT4001
HPR130 and HPR260
If interested in this training, please email the Customer Training Team or call (800) 643-0030.
Plasma process optimization for service personnel
March 7th
May 16th
June 27th THIS CLASS IS FULL. NO MORE ATTENDEES.
October 31st
December 12th
This one-day course is offered after the Mechanized service training classes and is designed to familiarize service personnel with operating parameters and common practices. Emphasis will be on cut quality and consumable life optimization. |
Key topics covered
Fundamentals of plasma cutting Optimizing to reduce secondary operations Optimizing to increase consumable life Basic system troubleshooting Preventive maintenance
If interested in this training, please email the Customer Training Team or call (800) 643-0030.
Automation Technical Service Training Level I
April 22nd-24th
June 24-26th
This 3-day course is designed to provide Technical Service Personnel with the foundation needed to install and support Automation products. This training is designed for those new to Automation CNCs and Height Controls, and is a combination of classroom and laboratory activities. During the training Hypertherm will offer you a combination of classroom and interactive training and exercises designed to assist you in addressing installation, end user training, and common troubleshooting in the field.
Key topics covered
Detailed review of the software capabilities
Hardware configurations
Capabilities of each model
Installation guidelines
A large portion of the training centered on hardware hands-on activities.
To enroll in this class please contact the Automation Training Team. (This class is not listed in the PDF brochure.)
|
|
