PowermaxEDGE
Integration made easy |
PowermaxEDGE brochure (PDF
385 K)
Hypertherm’s industry-leading Powermax plasma cutting system, with Sensor PHC torch height control, or EDGE Ti CNC with integrated lifter are now available in one fully-integrated package – the PowermaxEDGE.
The PowermaxEDGE offers metal fabricators a complete entry-level mechanized plasma cutting system with outstanding performance and value. Engineered for seamless installation and ease-of-use, the tightly coupled design of the PowermaxEDGE makes operation simple and integration easy.
Hypertherm’s PowermaxEDGE package makes equipment selection easy too: choose the configuration that works for you, order one part number, and you get a fully-integrated plasma cutting solution.
Powermax EDGE is available today through a limited list of channel partners. Please contact your Hypertherm sales Representative for more information.
|
|
| |
| |
Powermax G3 Series Plasma Systems |
The Powermax G3 leads the industry for high quality, cost effective, mechanized air plasma cutting. With patented Coaxial-assist technology, and advanced torch and power supply designs, the Powermax cuts thicker plates, at faster speeds, with better cut quality and consumable life than any other competitor.
Powermax1000
3/8" (10 mm) maximum pierce capacity
1/2" (12 mm) maximum cut capacity
Powermax1250
3/8" (10 mm) maximum pierce capacity
5/8" (16 mm) maximum cut capacity
Powermax1650
1/2" (12 mm) maximum pierce capacity
3/4" (19 mm) maximum cut capacity
Auto-voltage input sensing
Boost Conditioner circuit
HyLife electrode technology |
|
 |
| |
Sensor PHC |
The Sensor PHC (Plasma Height Control) is an easy-to-use automatic plasma height control. It provides improved cut quality through closed loop control.
On/off signal needed from customer-supplied controller
200 IPM maximum slew rateTimed initial height sensing (IHS)
Arc-voltage feedback with accuracy to 1
arc-volt
Simple operational controls and fault indicators
Lifter with built-in magnetic torch mount breakaway to protect the torch from plate collisions
|
|
|
| |
EDGE Ti |
The EDGE Ti sets the standard for high performance motion control in an affordable bundle.
Self-contained integrated plasma and Z-axis communication
Supports up to 4 servo axes
Windows XP embedded operating system
Industrial grade motherboard
Large touch screen monitor
Full-featured, shape cutting software (HyperNest)
Lifter with built-in magnetic torch mount breakaway to protect the torch from plate collisions
Available in 3 configurations
1. Without motors and cables
2. With cables and motors, single-side drive
3. With cables and motors, dual-side drive
|
|
|
| |
Configurations |
| System |
Version |
Leads |
Sensor PHC |
EDGE Ti bundle,* |
EDGE Ti bundle, |
EDGE Ti bundle, |
| |
|
|
bundle |
no motors, no cables |
with cables and motors, |
with cables and motors, |
| |
|
single-side drive |
dual-side drive |
 |
| Powermax1000 |
CSA |
25' |
089000 |
089012 |
089024 |
089036 |
| |
50' |
089006 |
089018 |
089030 |
089042 |
| CE |
25' |
089003 |
089015 |
089027 |
089039 |
| |
50' |
089009 |
089021 |
089033 |
089045 |
|
| Powermax1250 |
CSA |
25' |
089001 |
089013 |
089025 |
089037 |
| |
50' |
089007 |
089019 |
089031 |
089043 |
| CE |
25' |
089004 |
089016 |
089028 |
089040 |
| |
50' |
089010 |
089022 |
089034 |
089046 |
|
|
| Powermax1650 |
CSA |
25' |
089002 |
089014 |
089026 |
089038 |
| |
50' |
089008 |
089020 |
089032 |
089044 |
| CE |
25' |
089005 |
089017 |
089029 |
089041 |
| |
50' |
089011 |
089023 |
089035 |
089047 |
|
|
| *For edge-starts |
|
| |
Pierce capacity |
Cut performance (distance per minute) |
|
| System |
Recommended |
Maximum |
1/8" |
1/4" |
3/8" |
1/2" |
5/8" |
3/4" |
1" |
| |
|
|
(3 mm) |
(6 mm) |
(10 mm) |
(12 mm) |
(16 mm) |
(19 mm) |
(25 mm) |
|
| Powermax1000 |
3/8" |
1/2" |
264" |
132" |
63" |
42" |
31" * |
22" * |
12" * |
| |
(10 mm) |
(12 mm) |
(6,706 mm) |
(3,353 mm) |
1,600 mm) |
(1,067 mm) |
(787 mm) * |
(558 mm) * |
(305 mm) * |
|
|
| Powermax1250 |
3/8" |
5/8" |
432" |
161" |
94" |
60" |
40" |
31" * |
16" * |
| |
(10 mm) |
(16 mm) |
(10,973 mm) |
(4,089 mm) |
(2,388 mm) |
(1,524 mm) |
(1,016 mm) |
(787 mm) * |
(406 mm) * |
|
|
| Powermax1650 |
1/2" |
3/4" |
456" |
208" |
119" |
88" |
61" |
47" |
28" * |
| |
(12 mm) |
(19 mm) |
(11,582 mm) |
(5,283 mm) |
(3,023 mm) |
(2,235 mm) |
(1,549 mm) |
(1,194 mm) |
(711 mm) * |
|
|
|
| |
A word on Hypertherm’s cut capacity ratings
There is no industry standard for capacity ratings; be sure to understand the basis for competitive claims. Capacity ratings for mechanized applications are determined by piercing capability. The recommended capacity is the thickness that can be pierced without excessive wear on the consumable parts. The maximum capacity is the thickness that can be pierced, though with reduced consumable life.
|
|
|
