HyPerformance Plasma: HPR130 and HPR260

HyPerformance Plasma mechanized systems deliver incomparable HyDefinition cut quality at half the operating costs. By incorporating Hypertherm’s proven HyDefinition and LongLife technologies, HyPerformance Plasma boosts overall performance, productivity and profitability. The systems offer unmatched process flexibility to cut, bevel and mark metals up to 64 mm
(2-1 /2") thick.

Read what our HyPerformance customers have to say . . . click here.

HPR130 system brochure (PDF 272 K)
HPR260 system brochure (PDF 232 K)

**HyPerformance systems specifications**
		HPR130	HPR260

Capacity Mild steel	Dross free Production (pierce) Severance (edge starts)	16 mm (5/8") 25 mm (1") 38 mm (1-1/2")	32 mm (1-1/4") 32 mm (1-1/4") 64 mm (2-1/2")
Capacity Mild steel
Stainless steel	Production (pierce) Severance (edge starts)	20 mm (5/8") 25 mm (1")	32 mm (1-1/4") 50 mm (2")
Stainless steel
Aluminum	Production (pierce) Severance (edge starts)	20 mm (5/8") 25 mm (1")	25 mm (1") 50 mm (2")

Speed* (Mild steel)	Optimum quality	12 mm (1/2") 2200 mm/m (80 ipm)	12 mm (1/2") 3850 mm/m (145 ipm)

Cut angle	ISO 9013 range**	2-4	2-4

Weldability		Ready to weld	Ready to weld

Process gases by material (Plasma/shield)	Mild steel	O2/Air, O2/O2	O2/Air, O2/O2

	Stainless steel	H35/N2, N2/N2 H35-N2/N2, F5/N2	H35/N2, N2/N2 H35-N2/N2, F5/N2

	Aluminum	H35/N2, Air/Air H35-N2/N2	H35/N2, Air /Air H35-N2/N2

Process amps	Not all processes available for all materials	30-130	30-260

* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.

** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.