AC Servo drive package |
Hypertherm Automation's drive packages are designed with the necessary input / output to interface to a typical plasma or oxyfuel shape-cutting machine. Consisting of an enclosure, power supply, amplifiers and motors, the standard package configurations offer two AC servo drives and motors. These systems can be configured to retrofit many existing cutting machines.
Note: This drive package is designed to directly interface to the MicroEDGE and EDGE II controls for 2 - 4 axes of motion. Motor and control interface cables are available in 10', 25', and 50' lengths.
|
|
| Mechanical specification |
| Drive enclosure: two configurations NEMA 4/12 compliant |
| Enclosure size |
Height (inches) |
Width (inches) |
Depth (inches) |
| Small |
15.46 |
14.96 |
8.27 |
| Large |
20.19 |
19.69 |
11.81 |
 |
|
| Motor specifications: |
Motor
model# |
Operating speed
maximum/cont (RPM) |
Continuous
stall torque (lb-in) |
Peak stall
torque (lb-in) |
Continuous stall current (amps) |
Peak
current
(amps) |
Rotor
Inertia
(lb-in-sec 2) |
| 100W (THC) |
5000/3000 |
2.82 |
8.44 |
0.89 |
2.8 |
0.000573 |
| 300W |
3000/1500 |
19.2 |
51.7 |
2.6 |
8.0 |
0.00208 |
| 750W |
5000/3000 |
21.125 |
63.125 |
4.4 |
13.9 |
0.00186 |
|
|
| Motor specifications: |
Motor
model # |
Shaft diameter
(inches) |
Bolt hole (diagonal)
(inches) |
Flange width
(inches) |
Motor face
(inches) |
Motor length (inches) |
Total length w/o brake (inches) |
| 100W (THC) |
0.315 |
2.76 |
2.36 |
1.97 |
1.76 |
3.23 |
| 300W |
0.63 |
3.94 |
3.54 |
3.15 |
4.41 |
5.99 |
| 750W |
0.63 |
5.71 |
4.72 |
4.33 |
2.63 |
3.41 |
|
|
|
