Directions to Hypertherm Plasmatechnik GmbH and the Cutting Technology
Center (CTC)
Technologiepark Hanau
Rodenbacher Chaussee 6
Hanau-Wolfgang D-63457 Germany
Directions to Hypertherm Coming to Hanauer Kreuz either coming
from
- A45 from Seligenstädter Dreieck (Autobahn A3 Frankfurt-Würzburg) or
- A45 from Gambacher Kreuz (Autobahn A5 Frankfurt-Kassel) or
- A66 from Franfurt or Fulda.Once you reach Hanauer Kreuz
you need to follow the yellow signs of the Bundesstraße
43a direction Hanau-Wolfgang. Take the first exit „Wolfgang-Industriegebiet“ on
B43a. This is about 200 m behind the Hanauer Kreuz.At the first lights drive straight to Technologiepark
Hanau (you will see the sign). To do that change
to the left side of the street when you get to
the lights.Being on the street to
Technologiepark Hanau you will see the Entrance
Gate on the left side.You will find our office
in building 0801. The Cutting Technology Center
is in building 0804
