Capacity
Mild Steel |
Dross free
Production
(pierce)
Severence
(edge starts) |
32 mm (1-1/4")
32 mm (1-1⁄4")
75 mm (3") |
| Stainless Steel |
Production
(pierce)
Severence
(edge starts) |
32 mm (1-1⁄4")
75 mm (3") |
| Aluminum |
Production (pierce)
Severence (edge starts) |
32 mm (1-1⁄4")
75 mm (3") |
Speed*
(Mild steel) |
Optimum quality |
12 mm (1/2")
2540 mm/m
(100 ipm) |
| Cut angle |
ISO 9013
range** |
5 |
| Weldability |
|
Preparation required |
Process gases
by material
(Plasma/shield) |
Mild steel
Stainless steel
Aluminum
|
O2/H20
N2/H20
N2/H20 |
| Process amps |
Not all processes available
for all materials |
260-760
beveling (all) |
* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.
** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
The
HT4001 is a 340-amp water-injection plasma arc cutting system. It is
the ideal combination of quality, productivity and flexibility. It’s
a powerful, flexible system designed for high volume production applications
where reliability is vital. 
