Delivers fastest cut speeds and lowest operating costs available for 200-amp oxygen plasma.
- Production cutting capacity (piercing) - mild steel 25 mm (1")
- Maximum pierce capacity - mild steel 38 mm (1 1/2")
- Maximum cutting capapcity (edge start) - mild steel 50 mm (2")
Related products
Related links
Share this:
The dual gas HySpeed HT2000 and HYSpeed HT2000LHF operate with conventional consumables for optimal results on the broadest spectrum of material types and thicknesses. The HySpeed HT2000 and HySpeed HT2000LHF oxygen plasma cutting systems now utilize Hypertherm's patented Coaxial-assist™ jet technology to boost cutting speeds as much as 50% over conventional designs.
Learn more
| Capacity Mild Steel |
Dross free Production (pierce) Severence (edge starts) |
25 mm (1") 38 mm (1-1⁄2") 50 mm (2") |
|---|---|---|
| Stainless Steel |
Production
(pierce) Severence (edge starts) |
25 mm (1") 50 mm (2") |
| Aluminum |
Production (pierce) Severence (edge starts) |
25 mm (1") 50 mm (2") |
| Speed* (Mild steel) |
Optimum quality |
12 mm (1/2") 3050 mm/m (120 ipm) |
| Cut angle | ISO 9013 range** | 4-5 |
| Weldability | Ready to weld |
|
| Process gases by material (Plasma/shield) |
Mild steel Stainless steel Aluminum |
O2/Air,
O2/O2 Air/Air, N2/CO2 Air/Air, N2/Air, N2/CO2, H35/N2 Air/Air, N2/Air, N2/CO2, H35/N2 |
| Process amps | Not all processes available for all materials |
40-200 beveling (200) |
* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.
** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
HT2000 Mechanized Torch Consumables
 Built for long consumable life and low operating costs The LongLife process utilizes microprocessor control to ramp up the gases and current when initializing the cutting process and ramp them down when stopping. LongLife's precise control of cutting parameters extends electrode life dramatically. Depending on the cut duration and the method of cutting, a single electrode may deliver over 1200 starts before needing replacement. Even longer parts life with SilverPlus™ Now HySpeed HT2000 and HySpeed HT2000LHF systems feature patented SilverPlus electrode technology. This dramatic advance involves fusing a silver front-end onto the copper electrode base, so that silver surrounds the hafnium emitter. In many applications, this feature lets SilverPlus effectively double electrode life compared with standard all-copper electrodes. |
 System features Cuts as fast as competitive 300-amp plasma systems with only 200 amps of cutting power. Current output from 50 to 200 amps for materials that range in thickness from 18 gauge (1.2 mm) to 2 inch (50 mm). Production piercing of mild steel up to 1-inch (25 mm) thick, and maximum piercing up to 1.5-inch (38 mm). Bevel capability to 3/4 inch (20 mm) at 45. 100% Duty cycle at an output of 30 kW. Built-in microprocessor for precise control of current output, gas flow and other factors critical to cut quality, consumable parts life, and minimizing operating costs. Liquid-cooled torch contributes to long consumable parts life and low operating costs. Remote High Frequency (RHF) in the HySpeed HT2000 delivers real flexibility allowing the power supply to be up to 200 feet (60 m) from the torch. Superior warranty coverage - as with all Hypertherm systems - backs the HySpeed HT2000's power supply for two years and its torch for one year. |
- Operator Manuals
- HT2000 Firmware Installation for Improved 100 Amp Oxygen Cutting (195 KB) Download
- HT2000 Titan gas panel and High Frequency Console Instruction Manual (3 MB) Download
- HT2000-200 Volt Instruction Manual (10 MB) Download
- HT2000/MAX200 Water Muffler (715 KB) Download
- HT2000LHF Product Configuration Manual (290 KB) Download
- HySpeed HT2000 Plasma Arc Cutting System (674 KB) Download
- HySpeed HT200LHF - 200 Volt Instruction Manual (8 MB) Download
- HySpeed® HT2000 Plasma Arc Cutting System (10 MB) Download
- HySpeed® HT2000LHF (9 MB) Download
- Videos
- Hypertherm at SEMA Trade Show (19 MB) Watch video
- Hypertherm: 40 years of innovation (60 MB) Watch video
- Integrated Plasma Cutting Solutions (47 MB) Watch video
- Optimizing Your Plasma Operation (51 MB) Watch video
- Plasma vs. Oxyfuel (43 MB) Watch video
- World's Greatest TV program (17 MB) Watch video
- Consumable Sales Tools
- Torch Brochure: HT2000 (228 KB) Download
- Customer stories
- Application Profile: HT2000 on a Punch Press - Stoughton Trailers (156 KB) Download
- Application: HT2000 and Command THC for Manufacturing (36 KB) Download
- Application: HT2000 and HT4001 for the Metal Fabrication Industry (1 MB) Download
- Application: HT2000 on a CNC Table for the Shipbuilding Industry (37 KB) Download
- Product news (None Available)
- None Available
- Photos (None Available)
- None Available
- Logos (None Available)
- None Available
- Advertisements (None Available)
- None Available
- Service Information
- HT2000 50 Amp Upgrade (1 MB) Download
- HT2000 6kV Transformer Replacement (231 KB) Download
- HT2000 Kip Valve Upgrade (2 MB) Download
- HT2000 Modification for 50A Pilot Arc (234 KB) Download
- HT2000 Off Vavle Upgrade (396 KB) Download
- HT2000/HT2000LHF/HT4001 Gas Consoles Check Valve Installation (523 KB) Download
- HT2000/HT2000LHF/MAX200 Power Supplies Coolant Filter Re-Routing (1 MB) Download
- HT2000/HT2000LHF/MAX200 RHF Coolant Tank Replacement (427 KB) Download
- HT2000LHF Isolation Amplifier (Voltage Divider) PCB Installation (1 MB) Download
- MAX200/HT2000 Air Filter Upgrade (442 KB) Download
- MAX200/HT2000/HT2000LHF Power Supplies129252 Motor/Pump Replacement (859 KB) Download
- MAX200/HT2000/HT4001 RCC Installation (88 KB) Download
- Pressure Test Gauge Kit (454 KB) Download
