HySpeed Plasma HSD130 is an easy-to-use oxygen plasma system that is more productive and more cost-effective than other metal cutting solutions such as oxyfuel, air plasma, and non-LongLife oxygen plasma systems.
- Virtually dross-free cutting capacity
- mild steel 16 mm (5/8") - Production pierce capacity
- mild steel 25 mm (1") - Maximum cutting capacity (edge start)
- mild steel 38 mm (1 1/2")
Related products
Related links
Share this:
Easiest plasma system available on the market for oxygen and air plasma cutting - easy to install, easy to run, easy to troubleshoot. With our patented LongLife technology and 100% duty cycle, HySpeed Plasma is in a class of its own.
Learn more
| Capacity Mild Steel |
Dross free Production (pierce) Severence (edge starts) |
16 mm (5/8") 25 mm (1") 38 mm (1-1⁄2") |
|---|---|---|
| Stainless Steel |
Production
(pierce) Severence (edge starts) |
20 mm (3/4") 25 mm (1") |
| Aluminum |
Production (pierce) Severence (edge starts) |
20 mm (3/4") 25 mm (1") |
| Speed* (Mild steel) |
Optimum quality |
12 mm (1/2") 2200 mm/m (80 ipm) |
| Cut angle | ISO 9013 range** | 4 |
| Weldability | Ready to weld |
|
| Process gases by material (Plasma/shield) |
Mild steel Stainless steel Aluminum |
02/Air, Air/Air Air/Air, N2/N2, F5/N2, H35/N2 Air/Air, H35/N2 |
| Process amps | Not all processes available for all materials |
45-130 |
* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.
** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
HSD130 Consumables
| Ease of use
Easiest plasma system available on the market for
oxygen and air plasma cutting - easy to install,
easy to run, easy to troubleshoot. Three steps to cutting: 
Diagnostics display greatly simplifies troubleshooting and service, which leads to greater up-time for you. Fewer consumable parts and quicker consumable changeout means reduced downtime. |
Unmatched reliability
Rigorous, extensive testing, backed by four decades
of experience, guarantees the Hypertherm quality
you know you can count on. Endured rigorous reliability and exhaustive life testing procedures equivalent to over 10 years of use in operating environments from -10°C to +40°C (+14°F to +104°F). Dramatically reduced number of internal parts; less than half compared to other systems on the market. Studies have shown that fewer parts directly relates to greater reliability. Designed for easy access to components and simplified service, to keep you up and running. Self-diagnostics are performed automatically at startup and continually throughout the cutting process. This ensures the system is operating at peak performance. |
| Incredibly productive
With the fastest cut speeds in this class, rapid
pierce, and minimal secondary operations, you will
be more productive.
Patented LongLife technology significantly improves consumable life for both oxygen and air processes. 100% duty cycle for the most demanding production requirements. Fastest cut speed per amp compared to its closest competitors. 
|
Cost effective
Ease of use, reliability, and productivity all add up
to a more cost-effective system than other metal
cutting solutions.
Less rework and more parts per hour mean lower cost per cut. LongLife technology means our consumables last longer, so your consumable cost per part is lower.  |
- Videos
- HSD130 Cutting On Water Table (756 KB) Watch video
- Hypertherm at SEMA Trade Show (19 MB) Watch video
- Hypertherm: 40 years of innovation (60 MB) Watch video
- Integrated Plasma Cutting Solutions (47 MB) Watch video
- Optimizing Your Plasma Operation (51 MB) Watch video
- Plasma vs. Oxyfuel (43 MB) Watch video
- World's Greatest TV program (17 MB) Watch video
- System Sales Tools
- Featured Article: Service Center Fabricates its Future (1 MB) Download
- Consumable Sales Tools
- Brochure: HSD consumable parts list (168 KB) Download
- Product news
- Hypertherm Introduces HySpeed Plasma HSD130 (21 KB) Download
- Photos (None Available)
- None Available
- Logos (None Available)
- None Available
- Advertisements (None Available)
- None Available
