The Mariner is the most advanced CNC offering from Automation. In addition to the core software capability of all Hypertherm CNCs, the Mariner offers 12 axis control with up to 400 inputs and 600 outputs with a built-in Operators console. Targeting advanced plasma applications and laser tables, the Mariner delivers performance for cutting tables that is not found in other CNCs.
Mariner offers motion control operation of up to twelve axes of motion through use of an expandable SERCOS™ fiber optic ring. Add on modules for standard I/O and analog I/O are supported through the SERCOS ring for increased flexibility.
| Operating System |
Microsoft Windows XP® - Embedded Version |
| Processor |
Intel Pentium 4 3.0 GHz or greater |
| Memory |
512 Megabytes RAM or greater |
| Display |
15 " TFT Touch screen |
| Hard Drive |
80.0 Gigabyte hard drive or greater |
| Communication |
Networking |
| Floppy Disk |
1.44 Megabyte floppy drive and DVD - ROM |
| RFI / EMI Shielding |
Machine side opto-isolation:grounding |
| Station Selects |
Integrated 12 station operator console standard with Joystick
and 2 Speedpots |
| Keyboard |
Standard 101 key - USB keyboard |
| Supportable Axes |
Up to 12 axes |
| Distributed I /O |
Single ended and analog I /O supported via external
SERCOS I /O modules. |
| Dimensions |
26.3" (668.02 mm) W x 32.4" (822.96 mm) H
x 23.0" (584.2 mm) D; Depth 31.0" (787.4 mm) with
Cooler Option |
| Weight |
110 lbs. 130 lbs with optional chiller 0 to 50° C
@ 95 % relative humidity (non-condensing) |
| Operating Environment |
Onboard Voltage and Temperature Sensing Chiller /Cooler
Option |
| Power |
Universal Input |
* Information subject to change without notice.
* * User supplied display and keyboard are required |
For related products see our
Torch Height Controls.
The acronym “SERCOS” refers to Serial Realtime Communications System servo drive interface. This approach to communicating with the drive amplifiers is carried out over a fiber optic ring and replaces the traditional ± 10VDC analog output motion control card with a fiber optic driver card. In addition to controlling up to 12 servo axes, the system may also be used to communicate digital and analog I /O information to the controller. By supporting remote I /O and servo modules the system offers a highly flexible and cost effective solution to tailoring the control system to the machine requirements.
None available at this time.
