Handheld cutting
- Powermax30
- Powermax45
- Powermax65
- Powermax85
- Powermax1650
- MAX200
Upgrades
- Duramax HRT and HRTs torches
- RT80 torch
Fiber laser
CO2 laser
Mechanized plasma
Air plasma
- Powermax45
- Powermax65
- Powermax85
- Powermax1650
HyPerformance plasma
- HPR800XD
- HPR400XD
- HPR260XD
- HPR130XD
LongLife plasma
- HSD130
- HT2000
Marking plasma
- ArcWriter
Oxygen plasma
- MAX200
Upgrades
- HyPerformance XD
- HD3070 Torch
- Duramax MRT torch
Computer numeric controls
Torch height controls
Nesting software
English [change]
MAX200
Overview
The MAX200 continues Hypertherm's tradition of combining advanced technology and superior quality to deliver operating advantages that are unmatched in the industry.
An Entry-level oxygen cutting system, great for often-changing cutting requirements and production schedules. A proven production cutting system with an attractive initial capital cost.
Operating data
- Maximum cutting capacity - mild steel 50 mm (2")
- Recommended maximum mechanized production capacity - mild steel 25 mm (1")
New HyPro2000™ retrofit torch = High Productivity
Compatible with: MAX200, HT2000 and HySpeed HT2000
The New HyPro2000 for the MAX200 provides increased productivity through 25% faster speeds, 75% longer life and a quick-disconnect torch!
Download the MAX200 product brochure
Watch the HyPro2000 retrofit installation video for the MAX200
Please contact your Hypertherm sales associate for more information.
The MAX200 Advantage
- 200 amp, 30 kw power output delivers heavy-duty cutting capacity up to 2 inches (50 mm) thick on most metals; typical cutting speeds greatly exceed oxyfuel or other methods.
- 100% duty cycle at full power keeps you cutting - all day long.
- Adjustable power output from 40 to 200 amps lets the operator precisely match power to cutting requirements.
- A state-of-the-art transistorized power supply maintains constant output current regardless of variations in input voltages or torch-to-work distances, ensuring clean, square cuts throughout the cutting range.
- Max200's dual gas system - plasma and shield - allows you to run on Air/Air, 02/Air, N2/Air, N2/CO2, Ar-H2N2 or other combinations for optimal results on all metals and conditions.
- The MAX200's patented shielded torch front-end practically eliminates the possibility of double arcing, greatly enhancing piercing capabilities and extending consumable parts life.
- The water-cooled torch provides maximum cooling, another factor behind MAX200's long consumable parts life; the cooling system is built into the power supply for exceptional convenience.
- The MAX200 can be used on cutting machines or for hand-held applications.
- A machine motion delay control comes built into every system.
- Optional Torch Height Control (THC) and inductive Initial Height Sensing (IHS) are available for mahcine use.
- New consumables, an optional extended torch and heat shield, optimize the MAX200 for gouging applications.
- A full set of easy-to-read indicator/diagnostic lights monitor the status of external door panels, transformer and chopper temperature, coolant level, plasma and shield gas pressure, coolant temperature, and coolant flow, greatly simplifying troubleshooting.
- Extended leads up to 150'(45m) are available for both hand-held and mechanized systems for added flexibility.
- Safety interlocks are built in, ensuring maximum operator safety.
- MAX200 comes equipped with casters for easy wheeling, and there is a lifting eye located at the balance point for use with cranes.
- A full two-year warranty on the power supply and one-year coverage on the torch backs up Hypertherm's quality commitment.
Specifications
| Capacity Mild Steel |
Dross free Production (pierce) Severence (edge starts) |
25 mm (1") 25 mm (1") 50 mm (2") |
| Stainless Steel |
Production (pierce) Severence (edge starts) |
25 mm (1") 50 mm (2") |
| Aluminum |
Production (pierce) Severence (edge starts) |
25 mm (1") 50 mm (2") |
| Speed* (Mild steel) |
Book specification at highest output current |
12 mm (1/2") 2159 mm/m (80 ipm) |
| Cut angle | ISO 9013 range** | 4-5 |
| Weldability | Ready to weld |
|
| Process gases by material (Plasma/shield) |
Mild steel Stainless steel Aluminum |
Air/Air,
O2/Air, N2, CO2 Air/Air, N2/Air, N2/CO2, H35/N2 Air/Air, N2/Air, N2/CO2, H35/N2 |
| Process amps Cutting) |
Not all processes available for all materials |
40-200 beveling (200) |
* Note: Take care in comparison: competitors often show maximum cutting speeds rather than speeds that deliver the best cuts, as shown above. Cut speeds listed above deliver best cut quality, but cut speeds can be up to 50% faster.
** ISO 9013 is a standard that defines cut quality of thermally cut parts. The lower the range (range 1 is the lowest), the smaller the angle on the cut face. Cut angle in range 4 is better than in range 5.
Hypertherm dealer network
Hypertherm products are sold exclusively through our network of authorized partners. While different partners sell and service different products, in general, Hypertherm distributors sell the Powermax brand of air plasma products, as well as consumables for all types of Hypertherm systems; some distributors also sell automated products. Rental companies typically rent or lease Powermax air plasma products and may sell consumables for those systems. Table manufacturers / OEMs sell automated cutting products and consumables and typically offer service on what they sell. Systems integrators sell retrofits and upgrade products.
Visit our where to buy page to find a potential partner, or
contact Hypertherm directly if you need further assistance.
MAX200 Mechanized Torch Consumables
Customer reviews
Loading...Share your review
Please share your experience and help users like you choose a system that's right for them.
An Associate-owned company
