Hypertherm
Hypertherm

Heating, Ventilation and Air Conditioning

Download HVAC PDF (193 KB)

Duct fabrication

Specific patterns are cut from 22 to 24 gauge (.6 to .8 mm) thick sheet metal on a CNC table or by hand prior to being formed into the required duct shape.
System: Powermax30® hand only, Powermax45 or
Powermax1000 for hand or machine CNC table operation

Duct alteration

Holes in existing ducts are cut to install new branches or access ports.
System: Powermax190c, 30 or 45

Suspension system fabrication

Parts to fabricate hanging brackets are cut to length from 1/8" (3 mm) thick channel iron. Threaded rods are also cut to length for proper system suspension.
System: Powermax30 or 45
Key advantages of Powermax® systems
  • Easy to set up and operate.
  • Piercing capability makes starting interior cuts easy.
  • High cut quality reduces or eliminates secondary operations, such as grinding.
  • Drag-cutting technology makes it easy to follow a line or template.
  • Gouging process efficiently removes existing welds with reduced noise and smoke over conventional methods.
  • System portability offers ease of use at various locations.
  • Controlled arc and high cutting speeds reduce heataffected zone and warping.
  • Cut a variety of ferrous and non-ferrous metals including mild steel, stainless and aluminum – painted or rusted.
  • Pilot arc control feature enables uninterrupted cutting on expanded metal.
  • Machine torches are available for use on cutting machines such as X-Y tables, robots and track cutting systems.
  • FineCut™ consumables deliver higher quality cut with less dross, narrower kerf and smaller heat-affected zone.
Find Us On Facebook  Youtube Logo