|
|
RT80
Retrofit Torch
If you're ready to enhance your Powermax1100
with the kind of performance and reliability you'd
expect to get only from a Hypertherm G3 Series™
system ... then you're ready for the new RT80
retrofit torch.
|
Get
RT80
Retrofit Torch
Brochure PDF
|
| RT80
TORCH |
This
capable 80-amp torch solution incorporates patented and
proven performance enhancements: Coaxial-assist™ jet
technology
for faster cut speeds and Hypertherm electrode technology
for
parts life up to 10 times longer. Whether your Powermax1100
is part of a manual or a mechanized system, outfitting it
with
the new RT80 is sure to set new standards in your metal
cutting operations. |
|
| BENEFITS |
| The
RT80 retrofit torch delivers outstanding product benefits! |
- Cut
speeds up to 48% faster – 19 ipm on 1-inch steel
(480 mm/m on 25 mm steel) with patented Coaxial-assist
jet technology
- 173%
longer consumable life through unique torch dynamics
and HyLife electrode technology
- Consistent
cut quality assured by patented blow-back
contact-start torch technology
- Based
on the proven design of the Hypertherm T80 torch for
the Powermax1250 G3 Series
- Most
consumables compatible with existing Powermax1250
and other G3 systems, allowing for consolidation of
SKUs
- New
narrow-profile nozzle shield allows drag-cutting
convenience with the narrow front-end profile of a nozzle
- Chemically
cross-linked cable jacket is twice as cut resistant
and four times more burn resistant than competitive
cables
- Quick-disconnect
torch assembly provides a strain relief
designed for durability
- Backed
by 1-year torch-and-lead warranty
|
| Hypertherm's
patented Coaxial-assist jet design boosts
cutting speed as much as 20% over conventional designs.
|
|
|
|
| PRODUCTIVITY |
The RT80
torch delivers production costs almost 30% lower than
the original PAC135T torch on 3/4-inch mild steel, due to
higher
cutting speeds and dramatically increased parts life. |
| Cutting
speed on 3/4-inch mild steel (19 mm) |
 |
Number of 12-inch edge-started cuts on
3/4-inch mild
steel (19 mm) |
 |
Relative cost of cutting on 3/4-inch mild
steel (19 mm) |
 |
|
| RT80
TORCH COMPONENTS |
Manual
torch |
Mechanized
torch |
 |
| Kits and accessories |
- Hand-held
consumable parts kit
- Mechanized
consumable parts kit
- Circle
cutting guide assembly
- Leather
lead cover
- Hand
heat shield kit
|
| RT80
torch assemblies |
087033
RT80 Hand Torch Assembly, 25 ft (7.5 m) Leads
087034 RT80 Hand Torch Assembly, 50 ft (15 m)
Leads
087035 RT80M Machine Torch Assembly, 25 ft (7.5
m) Leads
087036 RT80M Machine Torch Assembly, 50 ft (15
m) Leads |
Hypertherm, Powermax, G3 Series, Coaxial-assist and HyLife
are trademarks of
Hypertherm, Inc. and may be registered in the United States
and/or other countries.
|
|
|
